Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
cas / cluster bench setup
14-10-2018, 18:40 PM,
(This post was last modified: 14-10-2018, 19:02 PM by Cniksor.)
Post: #6
|
|||
|
|||
RE: cas / cluster bench setup
(14-10-2018, 10:08 AM)wxwwxw Wrote: You need minimum: i was able to find a jbe from 3 series at the junkyard today, from matching car i got all the other parts from, exactly like photo i posted. i found this pinout on this forums but i think it isnt for jbe but JBR, do you happen to know how to connect the wiring? so i have: cas kombi key holder / start button jbe obd2 port OBD II 1: Ignition Connector Block (wakeup) 2: not connected 3: Ethernet connection to cic quadlock pin 37 (black plug) 4: Gnd Connector Block 5: Gnd Connector Block 6: K-bus high (pin 17 on blue 54 pin jbr plug, x14271) 7: I have this connected to pin 30 (PA-BUS) of the CAS (not sure if this is correct??? 8: Ethernet connection to cic quadlock pin 29 (black plug) 9: F_TD this goes to the DME) 10: not connected 11: Ethernet connection to cic quadlock pin 38 (black plug) 12: Ethernet connection to cic quadlock pin 31 (black plug) 13: Ethernet connection to cic quadlock pin 32 (black plug) 14: K-bus low (pin 33 on blue 54 pin jbr plug, x14271) 15: not connected 16: +12v Batt Connector Block JBR x14270 ( the long black plug) Pin 23 <----- GND Connector Block JBR x14271 (the 54pin blue plug) JBR x14271 Pin 10 = K-bus low <----> CAS X13376 pin 26 = K-bus low JBR x14271 Pin 46 = K-bus high <----> CAS X13376 pin 35 = K-bus high Pin 17 K-bus high <----> OBD Pin 6 Pin 33 K-bus low <----> OBD Pin 14 Pin 45 wakeup <----> (ignition) also connected to Pin 1 OBD JBR x14272 (the 54pin black plug) to 8 pin CID (black cic display plug) +12v -----> Power to Controller Pin 1 GND -----> GND to Controller Pin 2 Pin 11 <----> K-bus high CID Pin 3 Pin 30 <----> K-bus low CID Pin 4 Pin 1 -----> Power to CID Pin 1 Pin 27 -----> GND to CID Pin 3 Pin 29 <----> K-bus high CID Pin 5 Pin 31 <----> K-bus low CID Pin 6 JBR x4010 23pin plug (that connected to the fusebox base) Pin 3 <----- +12v Batt (source) Connector Block Pin 22 <----- +12v Batt (source) Connector Block CAS X13376 black 41pin plug Pin 21 <----- +12v Batt Connector Block Pin 34 <----- +12v Batt Connector Block Pin 12 <----> GND Connector Block Pin 25 <----> GND Connector Block Pin 8 <----> wakeup (ignition) Pin 26 <----> K-bus low Pin 35 <----> K-bus high ELV Pin 1 <----> GND Connector Block Pin 2 <----> CAS EL + pin 23 CAS Pin 3 <----> CAS EL - pin 24 CAS Pin 4 <----> CAS PA-bus pin 30 CAS Kombi Pin 18 <----- GND Connector Block Pin 9 <----- Power Connector Block Pin 7 <----> K-bus low Connector Block Pin 6 <----> K-bus high Connector Bloc |
|||
Reputation: +2 - bara001 [+1] , Mwahab [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content