Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Opcom v6 bootloader did not respond
09-06-2016, 06:43 AM,
Post: #1
|
|||
|
|||
Opcom v6 bootloader did not respond
Hello !
I have buy an opcom clone V6??? 1.45 with pic 18f45k80. Tested on astra h 1.7cdti. only worked on ms-can and sw-can. Hs -can dont work. I have try upgraded with the ocflash to a firmware 1.59. Now when I open VAUX-COM_120309a+131223d_GB and I make the test of interface the result is again fw 1.45 but when I try to connect to my astra no answer. I try to downgrade to 1.45/1,39 but ocflash tell me :< ''Bootloader did not respond...either killed interface, empty pic or new protection!'' So I try to check the bootloader with opcomfut and the bootloader seems ok, Wait 1 second for reset Set RTS High = PIC running RTS high Wait 1.5 second, so bootloader can start FW... RX Buffer clear... OK FW Versions- and Interface ID- request send. * ** *** Interface ID Answer: 0E 00 EB 4F 49 31 32 33 34 35 36 2D 31 32 33 34 BD *** Interface ID (ASCII): OI123456-1234 *** Firmware Version: 1.45 Also i try with new bootloader, please help with advice |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Opcom v6 bootloader did not respond - by race - 09-06-2016, 06:43 AM
RE: Opcom v6 bootloader did not respond - by obdstart - 13-06-2016, 07:20 AM
RE: Opcom v6 bootloader did not respond - by jenny123 - 13-06-2016, 10:05 AM
RE: Opcom v6 bootloader did not respond - by race - 14-06-2016, 07:24 AM
RE: Opcom v6 bootloader did not respond - by domelec - 14-06-2016, 11:15 AM
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content