Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DSC Module Coding - Error 5DE3
23-02-2024, 08:53 AM,
(This post was last modified: 23-02-2024, 08:55 AM by TLG.)
Post: #1
|
|||
|
|||
DSC Module Coding - Error 5DE3
Cut a long story short - test fitted a replacement CAS & DME (identical part numbers) in a 2012 Mini One in an attempt to rectify another issue it was having. Turned out it wasnt the CAS/DME at fault so put the original CAS & DME back in the car.
Now getting code 5DE3 - Control Unit, Encoding Error No bother I thought, I'll just recode it with ISTA/P. However no matter what I do it always fails - seems to program ( P ) the first bit fine but then fails on the coding ( C ) portion. I've tried telling it that it's a replacement unit and it still fails. Could the CAS/DME temporary swap have affected the vehicle order somehow and this is now affecting the coding of the DSC module? Anyone got any clues please? Using Windows 10 Pro, ISTA/P Loader 6.1, KDCAN USB Cable (not ideal I know). |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
DSC Module Coding - Error 5DE3 - by TLG - 23-02-2024, 08:53 AM
RE: DSC Module Coding - Error 5DE3 - by oceandiver86 - 23-02-2024, 09:08 AM
RE: DSC Module Coding - Error 5DE3 - by TLG - 23-02-2024, 11:08 AM
RE: DSC Module Coding - Error 5DE3 - by Stratofortress - 24-02-2024, 07:47 AM
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content