[mcrussell]

Has anyone come the below issue? I managed to preogram the BDC OK, however theres an encoding fault in the NBT & when attempting to flash either in esys or ISTA it fails, below is the error in esys:

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2024/03/14-12:14:01.193
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
[] prepareVehicleForFlash finished [PROGRESS]
[] system error: Possible gateways at one hop for ECU LinkName [mShortName=ACSM_01_ETHERNET_63] could not be resolved [THROWABLE]

Coding the NBT also fails with this error:

Read SVT before/after TAL execution is deactivated.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2024/03/14-12:17:53.194
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[HU_NBT - 63] prepareECUforCoding started [PROGRESS]
[HU_NBT - 63] prepareECUforCoding finished [PROGRESS]
[HU_NBT - 63] authenticateECUforCoding started [PROGRESS]
[HU_NBT - 63] authenticateECUforCoding finished [PROGRESS]
[HU_NBT - 63 - cafd_00000ded-003_012_025] Transaction type: cdDeploy; Message: TA started [TRANSACTION]
[HU_NBT - 63 - cafd_00000ded-003_012_025] Transaction type: cdDeploy; Message: TA finished [TRANSACTION]
[HU_NBT - 63] finalizeECUCoding started [PROGRESS]
MCDDiagService<id=74900, job=com.bmw.psdz.jobs.uds.MCD3_FinalizeECUCoding, service=RC_CCS - RoutineControlCheckCodingSignature, description=error: timeout, link=HU_NBT_IKCAN_63_ETHERNET> [DIAGSERVICE]
MCDDiagService<id=74633, job=com.bmw.psdz.jobs.uds.MCD3_FinalizeECUCoding, service=RC_CCS - RoutineControlCheckCodingSignature, description=error: negative response : busyRepeatRequest, link=HU_NBT_IKCAN_63_ETHERNET> [DIAGSERVICE]
[HU_NBT - 63] finalizeECUCoding error [PROGRESS]
[] job failed with negative response error:
code: service returned global negative response
description: Service RC_CCS returned a negative response with response code busyRepeatRequest; LinkName: HU_NBT_IKCAN_63_ETHERNET
severity: ERROR
[THROWABLE]
[HU_NBT - 63] There was an error during TAL execution, please check the log files. [WARN]
[HU_NBT - 63] - [Exception - HU_NBT - 63] job failed with negative response error:
code: service returned global negative response
description: Service RC_CCS returned a negative response with response code busyRepeatRequest; LinkName: HU_NBT_IKCAN_63_ETHERNET
severity: ERROR

[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "17s". [C206]
Abarbeitung beendet