Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Opcom v6 bootloader did not respond
09-06-2016, 06:43 AM,
Post: #1
|
|||
|
|||
Opcom v6 bootloader did not respond
Hello !
I have buy an opcom clone V6??? 1.45 with pic 18f45k80. Tested on astra h 1.7cdti. only worked on ms-can and sw-can. Hs -can dont work. I have try upgraded with the ocflash to a firmware 1.59. Now when I open VAUX-COM_120309a+131223d_GB and I make the test of interface the result is again fw 1.45 but when I try to connect to my astra no answer. I try to downgrade to 1.45/1,39 but ocflash tell me :< ''Bootloader did not respond...either killed interface, empty pic or new protection!'' So I try to check the bootloader with opcomfut and the bootloader seems ok, Wait 1 second for reset Set RTS High = PIC running RTS high Wait 1.5 second, so bootloader can start FW... RX Buffer clear... OK FW Versions- and Interface ID- request send. * ** *** Interface ID Answer: 0E 00 EB 4F 49 31 32 33 34 35 36 2D 31 32 33 34 BD *** Interface ID (ASCII): OI123456-1234 *** Firmware Version: 1.45 Also i try with new bootloader, please help with advice |
|||
13-06-2016, 07:20 AM,
Post: #2
|
|||
|
|||
RE: Opcom v6 bootloader did not respond
You have FAKE chinese PIC chip. Need to replace with original Microchip PIC 18F458 then reprogram with external programmator because bootloader empty.
Already have thread here on forum, only need to read. HERE http://cartechnology.co.uk/showthread.php?tid=5264 Quality tool as the beautiful woman...
|
|||
13-06-2016, 10:05 AM,
Post: #3
|
|||
|
|||
RE: Opcom v6 bootloader did not respond
Bin it and buy with ori PIC (V5 or new_opcom pcb).
|
|||
14-06-2016, 07:24 AM,
Post: #4
|
|||
|
|||
RE: Opcom v6 bootloader did not respond
Pic 18f45k80 is real and fastes then 18f450
http://www.microchip.com/wwwproducts/en/PIC18F45K80 |
|||
14-06-2016, 11:15 AM,
Post: #5
|
|||
|
|||
RE: Opcom v6 bootloader did not respond
Boot loader on new pic maybe needs reprogramming a different way to original pic
Check data sheets for both pics and see differences if my post helps please give Reputation and Thanks
|
|||
Reputation: +1 - mattydr67 [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content