Possibly Related Threads…

***M-Simon*** · 25-08-2016, 17:09 PM,

Only with a valid license! Just to prevent against misunderstandings smile

***krug*** · 25-08-2016, 19:19 PM,

Hi to all i may ask stupid question but i don't know how to update next :/ is a same as A1 & A2 ? Can't figure out what to do with .msi file . Some people updating via Rheingold some via Ista p. Is any tutorial or video how to update. Thanks in advance.

***Bimmer540*** · 25-08-2016, 20:00 PM,

-Install it
-Start ISTA-D with Icom connected to your car
-Go to connection manager and start the update.

***krug*** · 25-08-2016, 21:17 PM,

(25-08-2016, 17:09 PM)Munich Simon Wrote: Only with a valid license! Just to prevent against misunderstandings

Thanks

sound easy enough

***cryptocar*** · 25-08-2016, 21:47 PM,

(25-08-2016, 21:17 PM)krug Wrote:
(25-08-2016, 17:09 PM)Munich Simon Wrote: Only with a valid license! Just to prevent against misunderstandings

Thanks sound easy enough

Can also update like ICOM A1/2 via the browser interface using the tarballs I uploaded in post #2 ^^^. This is for people wary of .msi files.

But its easier to just install the .msi and then upgrade via ISTA connection manager.

***delete*** · 25-08-2016, 22:46 PM,

(25-08-2016, 14:02 PM)Jynkky Wrote: Intresting. Have u configure your icom next to ispi next mode?

How do you do this?

***Jynkky*** · 26-08-2016, 10:24 AM,

(25-08-2016, 22:46 PM)delete Wrote:
(25-08-2016, 14:02 PM)Jynkky Wrote: Intresting. Have u configure your icom next to ispi next mode?

How do you do this?

by webserver of icom or ista d config same place as updating firmware

***delete*** · 26-08-2016, 20:28 PM,

(26-08-2016, 10:24 AM)Jynkky Wrote:
(25-08-2016, 22:46 PM)delete Wrote:
(25-08-2016, 14:02 PM)Jynkky Wrote: Intresting. Have u configure your icom next to ispi next mode?

How do you do this?

by webserver of icom or ista d config same place as updating firmware

Oh OK. Will check when I'll do the update...

***Bimmeristi*** · 27-08-2016, 11:39 AM,

(25-08-2016, 20:00 PM)snypertje Wrote: -Install it
-Start ISTA-D with Icom connected to your car
-Go to connection manager and start the update.

I tried that in home, only KL30 connected(13.8V), i supply voltage to OBD port only. Problem is, update wont see in ISTA-D. So shoul also KL15 need voltage, connect to car and then can, or what goes wrong? I have all ready installed that .msi to pc.

Or how those extracted linux files should installing? Tried from web, but told " files are not for my ICOM...." (A2) Normally those files are . bin....

***inspi1981*** · 27-08-2016, 14:06 PM,

Don't need KL15.
KL30 on pin 16 and ground on 4+5 is enough

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	[MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS	hashtagmaster	115	38,378	6 hours ago Last Post: hashtagmaster
	BMW ICOM NEXT ORI All LED RED	aloxo	7	327	Yesterday, 21:56 PM Last Post: ferrum
	[RESTARTED] icom next clone repair (only single pcb)	____ANGEL___	51	5,428	Yesterday, 08:54 AM Last Post: ferrum
	ICOM resetting with 4.47	mcrussell	14	762	04-06-2024, 12:01 PM Last Post: NeRkO20
	New BMW maps officially just released	BugFix	123	43,262	29-05-2024, 23:37 PM Last Post: BugFix
	ICOM Firmware (NEXT & A2) always current!	Vojno	207	45,055	25-05-2024, 20:09 PM Last Post: Neon10
	How to use ICOM with BMW VirtualGT1	qeen	0	125	09-05-2024, 18:55 PM Last Post: qeen
	Poor wifi signal from new ICOM's	bmchicago	3	391	12-04-2024, 18:55 PM Last Post: Node
	Solved ✔ ICOM NEXT Error	bmwcare	4	2,575	01-04-2024, 11:34 AM Last Post: ivanp
	CCC flash WINKFP ICOM	BimmerSLO	9	456	29-03-2024, 19:17 PM Last Post: Hoborg

Contact Us