Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[SOLVED] How to setup router for Programming KOMBI and NBT
25-07-2017, 11:31 AM,
Post: #31
|
|||
|
|||
RE: [SOLVED] How to setup router for Programming KOMBI and NBT
Then no idea. I don't use web interface
|
|||
25-07-2017, 20:14 PM,
Post: #32
|
|||
|
|||
RE: [SOLVED] How to setup router for Programming KOMBI and NBT
Quote:Can I reset to default settings via the reset button? No it's for Flash Firmware over USB Try to change your Icom again; after that disconnect Icom from OBD Socket for a longer Time approx 10 mins. Connect and see if it changed to what you want. THX and REP will be nice
|
|||
26-07-2017, 18:14 PM,
Post: #33
|
|||
|
|||
RE: [SOLVED] How to setup router for Programming KOMBI and NBT
(25-07-2017, 20:14 PM)Sabreace Wrote:Quote:Can I reset to default settings via the reset button? Still no change. I must be doing something wrong. It happens on both icoms. I can't even get it to take the Dchp as a temporary setting. It just keeps reverting to static ip |
|||
26-07-2017, 19:05 PM,
(This post was last modified: 26-07-2017, 19:06 PM by Sabreace.)
Post: #34
|
|||
|
|||
RE: [SOLVED] How to setup router for Programming KOMBI and NBT
Quote:Still no change. I must be doing something wrong. It happens on both icoms. I can't even get it to take the Dchp as a temporary setting. It just keeps reverting to static ip Do you try it on both ports ? 58000 and 60080 THX and REP will be nice
|
|||
26-07-2017, 23:06 PM,
(This post was last modified: 26-07-2017, 23:08 PM by Mr Bimmer.)
Post: #35
|
|||
|
|||
RE: [SOLVED] How to setup router for Programming KOMBI and NBT
(26-07-2017, 19:05 PM)Sabreace Wrote:Quote:Still no change. I must be doing something wrong. It happens on both icoms. I can't even get it to take the Dchp as a temporary setting. It just keeps reverting to static ip Yes, you were right. No problems at all using port 58000. Thanks for your help. |
|||
29-07-2017, 11:32 AM,
Post: #36
|
|||
|
|||
RE: [SOLVED] How to setup router for Programming KOMBI and NBT
I have succeded all working with ISTA P.
How do you now connect ICOM in ESYS for flashing? Do I need to connect via gateway URL? |
|||
29-07-2017, 11:49 AM,
Post: #37
|
|||
|
|||
RE: [SOLVED] How to setup router for Programming KOMBI and NBT
(29-07-2017, 11:32 AM)BimmerSLO Wrote: I have succeded all working with ISTA P. |