Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

RAM coding problem
16-10-2023, 18:01 PM,
Post: #1
RAM coding problem
I have a F40, I replaced MGU with a used MGU, but is virginized. I replaced BDC too with a brand new BDC. I programmed it with ISTA and everything worked well.

Now I have problem with a factory fitted RAM, it lost CAFD, it was programmed with ISTA and CPS is always yyyyyyy. I can code it with e-sys, I can read CAFD, but when I read SVT always have CAFD_255.... and when I start car it lose all settings... when I read with ISTA it says not coded...

Any idea?
Quote this message in a reply
16-10-2023, 19:12 PM,
Post: #2
RE: RAM coding problem
Have you used online ista for programming ?

• EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE •
• NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH •
• HDD -> SSD NBT/NBTevo/MGU
• CARPLAY NBTevo/EN2/MGU •
• FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, •
• REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU •
UK BASED!
Quote this message in a reply
17-10-2023, 12:35 PM,
Post: #3
RE: RAM coding problem
(16-10-2023, 19:12 PM)DEJMIEN Wrote:  Have you used online ista for programming ?

I programed BDC and MGU on BMW dealer with ISTA online. FSC and all validations was ok... I think it was updated. I updated after that with esys too.
Quote this message in a reply
17-10-2023, 14:02 PM,
Post: #4
RE: RAM coding problem
Wrong thread.........

Don't ask for FREE FILES
Most tuning fies tested on Dyno by myself
Tuning - DPF Off - EGR Off - or any etc

Certificated WinOLS Trainer
Quote this message in a reply
17-10-2023, 14:19 PM,
Post: #5
RE: RAM coding problem
The same problem, just replace ram
Quote this message in a reply
05-11-2023, 18:28 PM,
Post: #6
RE: RAM coding problem
No Solution at all?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW G30 Entrynav2 - rear camera retrofit problem Krysiaman 19 1,364 23-05-2024, 20:39 PM
Last Post: Node
XZBMW coding drl taillight x3 g1 with esys kwastmichiel 12 1,356 22-05-2024, 11:57 AM
Last Post: Richard_1360
XZBMW BMW e87 LCI hralights retrofit problem XeoN 0 34 21-05-2024, 21:17 PM
Last Post: XeoN
XZBMW BMW E71 EGS coding 8HP70 used BS68 10 577 21-05-2024, 20:56 PM
Last Post: Batje
XZBMW BMW G05. Coding(delete) Electric Tow Bar TIGHTFIN 3 124 21-05-2024, 15:56 PM
Last Post: kimz
XZBMW M performance brake DSC2 SBRE coding Ckh091020 4 394 19-05-2024, 06:09 AM
Last Post: Ckh091020
XZBMW Bmw e53 dsc coding hero3838 20 399 15-05-2024, 16:00 PM
Last Post: Node
XZBMW Coding a F80 M3 race car PeterY 18 848 14-05-2024, 08:38 AM
Last Post: simonchs
XZBMW coding 2018 bmw bike with ncs expert carlosabh71 13 1,656 09-05-2024, 14:25 PM
Last Post: TheNine90
XZBMW Motorrad esys coding using ENET and ICOMD cable bennymx 17 3,021 09-05-2024, 11:20 AM
Last Post: Vojno

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content