Possibly Related Threads…

***sollaris*** · (This post was last modified: 06-07-2016, 13:59 PM by sollaris.)

(06-07-2016, 10:19 AM)snypertje Wrote: You must use that cable between 20 pin and K+DCan.

Ok buddy..
I bought that adaptor from ebay as you said,to bridge pin 7 and 8.
It will come next week.
See you than.

(06-07-2016, 11:06 AM)beemered Wrote: You need the OBD.ini and you need to connect pin 7 + 8 in the K+DCAN

I ordered the adaptor cable....
Do you please have a OBD.ini file...?
So i can have all the puzzle pieces until the cable arrives?
Thank you.

***Bimmer540*** · (This post was last modified: 06-07-2016, 14:13 PM by Bimmer540.)

(06-07-2016, 13:49 PM)sollaris Wrote:
(06-07-2016, 10:19 AM)snypertje Wrote: You must use that cable between 20 pin and K+DCan.

Ok buddy..
I bought that adaptor from ebay as you said,to bridge pin 7 and 8.
It will come next week.
See you than.

(06-07-2016, 11:06 AM)beemered Wrote: You need the OBD.ini and you need to connect pin 7 + 8 in the K+DCAN

I ordered the adaptor cable....
Do you please have a OBD.ini file...?
So i can have all the puzzle pieces until the cable arrives?
Thank you.

Ista-d VCI config: ediabas!!!!

***beemered*** · 06-07-2016, 14:14 PM,

Install Ediabas from your download. ODB.ini is in there.
Open K+DCAN cable and solder 7+8 together (then you do not need the adapter)

***Bimmer540*** · 06-07-2016, 15:11 PM,

Indeed Ediabas is required!!!

***doktorabg*** · 06-07-2016, 19:11 PM,

(06-07-2016, 14:14 PM)beemered Wrote: Install Ediabas from your download. ODB.ini is in there.
Open K+DCAN cable and solder 7+8 together (then you do not need the adapter)

For full scan - 100% need adapter with 17 and 20 pin soldered.
For engine 16pin OBD under dash is enough.
BTW is better to use DIS V57 for E46.

***Bimmer540*** · 15-07-2016, 11:46 AM,

(06-07-2016, 13:49 PM)sollaris Wrote:
(06-07-2016, 10:19 AM)snypertje Wrote: You must use that cable between 20 pin and K+DCan.

Ok buddy..
I bought that adaptor from ebay as you said,to bridge pin 7 and 8.
It will come next week.
See you than.

(06-07-2016, 11:06 AM)beemered Wrote: You need the OBD.ini and you need to connect pin 7 + 8 in the K+DCAN

I ordered the adaptor cable....
Do you please have a OBD.ini file...?
So i can have all the puzzle pieces until the cable arrives?
Thank you.

succeeded?

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ISTA+ 4.47.1x Install Files - MEGA	shawnsheridan	24	2,455	4 hours ago Last Post: vld
	ista + 4.47 install	simplextibi	1	301	9 hours ago Last Post: slackers
	ista 4.46 Standalone	kiranabc	95	11,585	28-04-2024, 16:43 PM Last Post: palapas1974
	ISTA Standalone Licenserequest up to v4.37.4x	Sedoy	8,711	671,183	27-04-2024, 14:11 PM Last Post: Sedoy
	ISTA 4.46.xx problems and possible solution	Sedoy	98	12,026	27-04-2024, 09:48 AM Last Post: egyclick
	ISTA 4.47 test plan not available on M3	bmwm3power	3	178	26-04-2024, 20:15 PM Last Post: 2013m5
	ISTA 4.47.1x I-LEVEL+OVERVIEW	AutoExe3219	0	305	24-04-2024, 22:52 PM Last Post: AutoExe3219
	[MEGA] ISTA 4.32 // ISTA-P 3.72 + ALL LOADER up to 6.6 // no license needed	hashtagmaster	61	18,512	21-04-2024, 22:17 PM Last Post: grizzle
	ISTA SQLiteDBs PL Polish 4.40.12 - 4.40.40	maksymw	3	1,001	21-04-2024, 12:02 PM Last Post: matigdy
	Update ISTA 4.39.20 SQLiteDBs Italian Language	diman64	10	1,019	20-04-2024, 11:20 AM Last Post: elettra19

Contact Us