Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Icom A2(chinese clone)
08-03-2017, 16:38 PM,
Post: #11
|
|||
|
|||
RE: Icom A2(chinese clone)
What is the firmware version? and wich Ista are you using?
|
|||
08-03-2017, 17:50 PM,
(This post was last modified: 08-03-2017, 17:50 PM by BMWS1000RR.)
Post: #12
|
|||
|
|||
RE: Icom A2(chinese clone)
I dont have an answer for you to try on your issue, but I can tell you that I have had 4 ICOM A2 devices, and 3 had issues.
First one over heated and had the "FAN ERROR" and guess what, there is no fan in the A2, so it quit working with Tool32, and the red light always flashed, and finally stopped working with ISTA 2nd one brand new never worked with Tool32. Just would not connect. Then it over heated and would work only for 30 minutes at a time with ISTA P and D. Finally died completely. 3rd one never worked with Tool32 and overheated and all light when out and never came back on. On my 4th one now in only 6 months of getting these things. It also will not work with Tool32. I have only had it 2 weeks and at least it does work with ISTA |
|||
08-03-2017, 18:02 PM,
Post: #13
|
|||
|
|||
RE: Icom A2(chinese clone)
(08-03-2017, 16:38 PM)snypertje Wrote: What is the firmware version? and wich Ista are you using? firmware is this one 1-40.05 and ista-p 3.60 (spide80 version) ista-d 4.02 (08-03-2017, 17:50 PM)BMWS1000RR Wrote: I dont have an answer for you to try on your issue, but I can tell you that I have had 4 ICOM A2 devices, and 3 had issues. can i ask what seller you bought it from, i bought my one from Ebay but it was a seller named Zues_tech (or similiar) from what i heard they are reputable and also gave me a 1 year warranty. also may i ask what you did to make it work with ista? maybe i have missed a couple of steps or so.... thank you. |
|||
08-03-2017, 19:24 PM,
Post: #14
|
|||
|
|||
RE: Icom A2(chinese clone)
Instead of asking million question, ask already somebody to remote to your station via teamviewer it will be quick in-and-out job because it's going to be right there on spot, and assistant will know by heart where and what too look for.
Because i feel like something is missing out of puzzle An Example: Are all per-requirments are been meet or installed is your firewall on or off? is your EDIABAS.ini been properly configured have you tried on another car, is your cable(s) working are all of the fuse o.k. have you installed d-can software or not and if yes then how to uninstall and so far and so on.... I personally hate to do remote stuff so don't ask me. If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
08-03-2017, 19:44 PM,
Post: #15
|
|||
|
|||
RE: Icom A2(chinese clone)
(08-03-2017, 19:24 PM)CATAHA Wrote: Instead of asking million question, ask already somebody to remote to your station via teamviewer it will be quick in-and-out job because it's going to be right there on spot, and assistant will know by heart where and what too look for. i totally appreciate what you mean and i will try the above mentioned. I didn't realise some members on this forum do remote services through team viewer and i would happily ask for assistance on this matter if they are able to do so through that means. at the same time if there is a link on or guide on how to set up these ICOM A2's for Ista-D and Ista-P i would appreciate if you could point me in the right direction. Again i do apologise with all these questions being asked and i do appreciate all the help i have received so far. |
|||
08-03-2017, 20:10 PM,
(This post was last modified: 08-03-2017, 20:14 PM by CATAHA.)
Post: #16
|
|||
|
|||
RE: Icom A2(chinese clone)
(08-03-2017, 19:44 PM)CMOSUK Wrote:(08-03-2017, 19:24 PM)CATAHA Wrote: Instead of asking million question, ask already somebody to remote to your station via teamviewer it will be quick in-and-out job because it's going to be right there on spot, and assistant will know by heart where and what too look for. Start Over Use RCleanerV4.4, restart and then DO NOT START ISTA JUST YET Install following" Java Flash SVG Viewer .net 2.0 + 4.5.2 + 4.6.2 vcredist 2005, 2008, 2010, 2012, 2013, 2015 either x86 or x64 vs90_piaredist Windows6.1-KB2819745 Visual Basic 6.0 Full Runtime 2.0 WinRar newest version Open device manager and either turn off Firewall/ANTI-virus during use of ISTA-p/d or open ports that are required for ista Install BMW Tool 2.12 Install EDIABAS_7.3.0_Patched version open C:\EDIABAS\Bin\EDIABAS.ini and make sure it's been configured for REMOTE and YOUR_ICOM_IP_ADDRESS now restart Shutdown Firewall/ANTI-virus via computer/Device manager open RheinGold enter "Key" Open Again Rheingold Go to Configure your interface and choose default been connected via wire and ediabas now try to connect and report if thing still do not work then either your ANTI-virus is your problem or you have bad copy or or or If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
11-03-2017, 14:14 PM,
Post: #17
|
|||
|
|||
RE: Icom A2(chinese clone)
''Install EDIABAS_7.3.0_Patched version
open C:\EDIABAS\Bin\EDIABAS.ini and make sure it's been configured for REMOTE and YOUR_ICOM_IP_ADDRESS'' Hi I have one in the ista-d folder as well and in c root. Could it be this that's conflicting? If so should I delete a folder? If so which one? Sent from my D5803 using Tapatalk |
|||
11-03-2017, 14:41 PM,
Post: #18
|
|||
|
|||
RE: Icom A2(chinese clone)
As said before, start over and follow the instructions. Disable antivirus/firewall. I've done quite a few remote installs of INPA/ISTA etc and really it isn't that hard. Just follow the instructions and you'll be good to go.
|
|||
11-03-2017, 14:52 PM,
Post: #19
|
|||
|
|||
RE: Icom A2(chinese clone)
|
|||
13-03-2017, 13:24 PM,
Post: #20
|
|||
|
|||
RE: Icom A2(chinese clone)
I have installed it according to the above instructions but I'm still getting the same error in Ista-d
API-0006. Is anyone able to do help me out and come onto Teamviewer and check it out? Sent from my D5803 using Tapatalk |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
[MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS | hashtagmaster | 108 | 36,759 |
Yesterday, 08:02 AM Last Post: hashtagmaster |
|
ICOM Firmware (NEXT & A2) always current! | Vojno | 206 | 43,584 |
12-04-2024, 23:36 PM Last Post: bennymx |
|
Poor wifi signal from new ICOM's | bmchicago | 3 | 345 |
12-04-2024, 18:55 PM Last Post: Node |
|
Solved ✔ ICOM NEXT Error | bmwcare | 4 | 2,528 |
01-04-2024, 11:34 AM Last Post: ivanp |
|
CCC flash WINKFP ICOM | BimmerSLO | 9 | 387 |
29-03-2024, 19:17 PM Last Post: Hoborg |
|
E53 LCM Clone | maninblack | 10 | 371 |
25-03-2024, 14:03 PM Last Post: Spitfire555 |
|
For anyone having problem with ICOM NEXT FW update via ISTA+. | ImmBoo | 16 | 4,391 |
24-03-2024, 11:29 AM Last Post: Twointje |
|
TESTO tool with ICOM | Rolzs | 5 | 460 |
17-03-2024, 20:23 PM Last Post: Vojno |
|
Request xHP 6HP decrypted files and icom flasher | tste1982 | 10 | 1,022 |
05-03-2024, 22:47 PM Last Post: bradsm87 |
|
FRM repair and clone DME & DDE | jaki | 27 | 1,660 |
01-03-2024, 22:52 PM Last Post: r0my81 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content