Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
e87 2006 CAS "Processor Error"
23-01-2022, 19:29 PM,
Post: #1
|
|||
|
|||
e87 2006 CAS "Processor Error"
Hello,
i got an e87 2006 here. Car doesnt Start. ELV Lock Symbol is Displayed in dash. ELV Reset was done but didnt Fix the Problem. The CAS still shows up in ISTA with Error "Processor Error". When i read live values from CAS it show a value for 2s then Display not available. Is there anything i can try before changing it? Maybe bad Eeeprom? Or just a reflash with WINKFP? I also got Original UPA, R270+ and Caprog here if there able to fix it. Thanks for your help guys |
|||
23-01-2022, 19:55 PM,
Post: #2
|
|||
|
|||
RE: e87 2006 CAS "Processor Error"
One Little Thing like Power Reset over 30min you have already done?
|
|||
23-01-2022, 20:44 PM,
Post: #3
|
|||
|
|||
RE: e87 2006 CAS "Processor Error"
Yep. Didnt help.
|
|||
23-01-2022, 21:25 PM,
Post: #4
|
|||
|
|||
RE: e87 2006 CAS "Processor Error"
try to update cas with winkfp, I have done it on cas3 e60 and all ok, error go off and car start and go
|
|||
23-01-2022, 21:34 PM,
Post: #5
|
|||
|
|||
RE: e87 2006 CAS "Processor Error"
You had the same error?
|
|||
24-01-2022, 01:28 AM,
Post: #6
|
|||
|
|||
RE: e87 2006 CAS "Processor Error"
Try to disconnect bsd cable from battery terminal and see if the car starts.
|
|||
24-01-2022, 20:17 PM,
(This post was last modified: 24-01-2022, 20:18 PM by moreply.)
Post: #7
|
|||
|
|||
RE: e87 2006 CAS "Processor Error"
BSD cable didnt help sadly. I have readed the MCU of the CAS2. Maybe someone can check them and tell me if there ok?
|