[VOLVO480BOY]

Hello Fellas ..

ive got an Ford Focus Mk2 2010 1.6 TDCi with Keyless go

subject of my problem is that the Ingnition wont come up in Dashboard.. im a little bit clueless ..

yesterday it started fine and all 2 Keys will be accepted at any cirumstances. Lock / Unlock works fine..

ive Bridged Relais K41 to get Igniton in Dash.. car wont start normally.. if Relais is Pulled LOCK wont work.. so if added 12V Ext. Source trough k41 dash go to Ignition but will Fail to start..( its like in a Freeze Situation) this Setup has worked only 1 Time..that the Powerbutton start the Car. i cant read DTC because of Failed Ign.On 

BJB looks fine.. Dash looks Fine..

the Little Dash infocenter react when POWER button is Pressed.. ( Just the Center Panel MENU appears .. nothing else)

is there a Failure in PCM Maybe or is there anonther way to get Igniton UP if immo wont be the Problem? Greets the VolvoBoy

im glad for any help

[ToolSet]

i cant read DTC because of Failed Ign.On 

If you set your lights to on position and then you press the warning lights, the can system should wake up and the scanner I guess it works.

[al70]

check the earth strap for corrosion, had the same problem with a mondeo, replaced earth strap and back to normal, worth a try