Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F15 Programming Error
14-03-2024, 12:17 PM,
(This post was last modified: 14-03-2024, 12:18 PM by mcrussell.)
Post: #1
|
|||
|
|||
F15 Programming Error
Has anyone come the below issue? I managed to preogram the BDC OK, however theres an encoding fault in the NBT & when attempting to flash either in esys or ISTA it fails, below is the error in esys:
TAL execution started. VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197] ExecutionID=2024/03/14-12:14:01.193 [] prepareTALExecution started [PROGRESS] [] prepareTALExecution finished [PROGRESS] [] prepareVehicleForFlash started [PROGRESS] [] prepareVehicleForFlash finished [PROGRESS] [] system error: Possible gateways at one hop for ECU LinkName [mShortName=ACSM_01_ETHERNET_63] could not be resolved [THROWABLE] Coding the NBT also fails with this error: Read SVT before/after TAL execution is deactivated. TAL execution started. VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197] ExecutionID=2024/03/14-12:17:53.194 [] prepareTALExecution started [PROGRESS] [] prepareTALExecution finished [PROGRESS] [] prepareVehicleForCoding started [PROGRESS] [] prepareVehicleForCoding finished [PROGRESS] [HU_NBT - 63] prepareECUforCoding started [PROGRESS] [HU_NBT - 63] prepareECUforCoding finished [PROGRESS] [HU_NBT - 63] authenticateECUforCoding started [PROGRESS] [HU_NBT - 63] authenticateECUforCoding finished [PROGRESS] [HU_NBT - 63 - cafd_00000ded-003_012_025] Transaction type: cdDeploy; Message: TA started [TRANSACTION] [HU_NBT - 63 - cafd_00000ded-003_012_025] Transaction type: cdDeploy; Message: TA finished [TRANSACTION] [HU_NBT - 63] finalizeECUCoding started [PROGRESS] MCDDiagService<id=74900, job=com.bmw.psdz.jobs.uds.MCD3_FinalizeECUCoding, service=RC_CCS - RoutineControlCheckCodingSignature, description=error: timeout, link=HU_NBT_IKCAN_63_ETHERNET> [DIAGSERVICE] MCDDiagService<id=74633, job=com.bmw.psdz.jobs.uds.MCD3_FinalizeECUCoding, service=RC_CCS - RoutineControlCheckCodingSignature, description=error: negative response : busyRepeatRequest, link=HU_NBT_IKCAN_63_ETHERNET> [DIAGSERVICE] [HU_NBT - 63] finalizeECUCoding error [PROGRESS] [] job failed with negative response error: code: service returned global negative response description: Service RC_CCS returned a negative response with response code busyRepeatRequest; LinkName: HU_NBT_IKCAN_63_ETHERNET severity: ERROR [THROWABLE] [HU_NBT - 63] There was an error during TAL execution, please check the log files. [WARN] [HU_NBT - 63] - [Exception - HU_NBT - 63] job failed with negative response error: code: service returned global negative response description: Service RC_CCS returned a negative response with response code busyRepeatRequest; LinkName: HU_NBT_IKCAN_63_ETHERNET severity: ERROR [] finalizeVehicleCoding started [PROGRESS] [] finalizeVehicleCoding finished [PROGRESS] [] finalizeTALExecution started [PROGRESS] [] finalizeTALExecution finished [PROGRESS] TAL execution finished [TAL_EXECUTION_FINISHED] TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "17s". [C206] Abarbeitung beendet |
|||
15-03-2024, 19:57 PM,
Post: #2
|
|||
|
|||
RE: F15 Programming Error
I only managed to solve this issue by replacing the NBT, thats the easy way.
| BimmerFiks AS | Instagram | |
|||
17-03-2024, 07:37 AM,
Post: #3
|
|||
|
|||
RE: F15 Programming Error
Thanks for the reply, this was my thought in the end too.
|
|||
17-03-2024, 16:07 PM,
Post: #4
|
|||
|
|||
RE: F15 Programming Error
No. Flash NBT via UDS. It will work!
|
|||
17-03-2024, 18:29 PM,
Post: #5
|
|||
|
|||
RE: F15 Programming Error
Wrong FA, should match NBT version
|
|||
17-03-2024, 19:34 PM,
Post: #6
|
|||
|
|||
RE: F15 Programming Error
You need flash NBT without HTTP Protocol via ICOM connected with DHCP server
► Remote BMW & Mini Coding Service
► NCD 2.0 coding ► Remote Chiptuning BMW Fxx EDC17 / MEVD ► FSC Service CIC/NBT/NBTEVO/EntryNAV2/MGU ► CarPlay NBT EVO / EntryNav2 ► CarPlay & Android Auto MGU with and w/o ATM ► EntryNav2 Patch, Component Protection, Retrofit, FSCs ► MGU Patch , Component Protection, Retrofit, FSCs |
|||
18-03-2024, 21:03 PM,
Post: #7
|
|||
|
|||
RE: F15 Programming Error
You should to change flashing protocol to UDS, and flash each flash mode step by step (not all at once)
Bagum4uK
--------------------------------------------------------------------------------------------------------- Press Thanks and Reputation, if my post helped you. |
|||
20-03-2024, 05:38 AM,
Post: #8
|
|||
|
|||
RE: F15 Programming Error
I tried all off the above and it still wouldn’t flash.
| BimmerFiks AS | Instagram | |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content