+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: Diagbox 7.83 software (/showthread.php?tid=21601)
RE: Diagbox 7.83 software - Simple - 15-02-2017
Yes, it is better to install DiagBox on a 32 bit system, and if you wish to use a Virtual Machine (like myself) then use Windows XP SP3, as it requires fewer resources.
Telecoding works for me in all DiagBox 7.83 and 8.17-8.38 (I have a Citroen C8 2.0 HDi).. Everyone needs to try DiagBox for himself, sometimes the problems are with the VCI or the car itself..
To overcome internet connection issue when Telecoding, follow this process:
Precaution: Ensure you take a snapshot of your configuration prior to making a change in case you need to revert to original settings.
1- Start DiagBox with Network disconnected
2- Select your car brand and model
3- Perform Global Scan
4- Select the Module you wish to configure (DiagBox will try to connect to PSA servers, then it will timeout and offer Manual Configuration),
5- Choose the item to be reconfigured, perform the changes and apply/save them.
Done!
RE: Diagbox 7.83 software - blederik - 19-03-2017
(08-02-2017, 13:55 PM)Simple Wrote: Well done, is your VM VirtualBox or Workstation?
Ensure you have .NET 3.51 and VC++ 2008 and operate DiagBox as Administrator.
If you are using VirtualBox then close VirtualBox and start an Administrator's CMD, navigate to "C:\Program Files\Oracle\VirtualBox\" and execute the following command:
C:\Program Files\Oracle\VirtualBox>VBoxManage setextradata "Your VM" "VBoxInternal/Devices/pcbios/0/Config/DmiSystemSerial" "System Serial"
Note: Replace "Your VM" with your Virtual Machine's name, and "System Serial" with your hardware's # or any code or text such as "CDN29326BH" or "DIAGBOX7".
Hallo.
Does it possible to give here some videoguide or pictures, where i can find data of Virtual Machine's name and System serial?
Thanks.
RE: Diagbox 7.83 software - Simple - 19-03-2017
For VirtualBox on the VirtualBox's Manager interface and in a folder on the Host Windows, here:
C:\Users\user-name\VirtualBox VMs\
For VMware on the Workstation interface Tabs or library side bar or the host Windows, here:
C:\Users\user-name\Documents\Virtual Machines\
For the serial number, enter your name in the light blue area or any other text instead of the words "System Serial".
RE: Diagbox 7.83 software - blederik - 20-03-2017
So for example in my case: C:\Program Files\Oracle\VirtualBox>VBoxManage setextradata "Virtual Win 7 32 bit - SP1, VC++, FW, DB 7.57" "VBoxInternal/Devices/pcbios/0/Config/DmiSystemSerial" "DIAGBOX"
1.) And i want to ask, if it is needful install also exact .NET 3.51 and VC++ 2008 although i have already installed .NET 4.6.1 and VC++ 2015?
2.) Do somebody know, what does it mean this error and how can i remove it?
![[Image: 2uqyfdc.png]](http://i63.tinypic.com/2uqyfdc.png)
RE: Diagbox 7.83 software - Simple - 20-03-2017
I very much doubt that your virtual machine's name is "Virtual Win 7 32 bit - SP1, VC++, FW, DB 7.57". Are you using VirtualBox? or are you mixing between VirtualBox and DiagBox?
Please notice that software is developed using certain engines and sometimes it requires the presence of components from these specific engines (not newer or older versions).
Please review this link:
http://cartechnology.co.uk/showthread.php?tid=12288
RE: Diagbox 7.83 software - blederik - 20-03-2017
![[Image: 2djyv47.png]](http://i65.tinypic.com/2djyv47.png)
(20-03-2017, 10:37 AM)blederik Wrote: I had to make few exams, so i was creating VMs names according to their parameters of features. Although these crazy names.
RE: Diagbox 7.83 software - Simple - 20-03-2017
While the "quotes" used before and after the path/name is to ensure it is being used as is and to over come some OS specific requirements.
However, when you name anything, try to avoid the using spaces, commas and special characters. You never know what problems you are going to face.
Luckily, you can change names easily in VirtualBox, but look at the .VDI file name, it wouldn't change. So, if you need to execute instructions that affect the name.vdi file, you need to check if it is the same name.
But if you want to change the name of the .VDI file, do that manually, then go the the .VBOX file and change it there using a text editor. (make a copy of every file before landing yourself in trouble).
RE: Diagbox 7.83 software - blederik - 23-03-2017
(20-03-2017, 13:24 PM)Simple Wrote: While the "quotes" used before and after the path/name is to ensure it is being used as is and to over come some OS specific requirements.
However, when you name anything, try to avoid the using spaces, commas and special characters. You never know what problems you are going to face.
Luckily, you can change names easily in VirtualBox, but look at the .VDI file name, it wouldn't change. So, if you need to execute instructions that affect the name.vdi file, you need to check if it is the same name.
But if you want to change the name of the .VDI file, do that manually, then go the the .VBOX file and change it there using a text editor. (make a copy of every file before landing yourself in trouble).
Thank you I will try it...
1.) I would like to ask also if it is needful execute the command before instalation of Diagbox or can it be after?
2.) Can I execute command for more virtual maschines or only for one?
3.) Does it needfull to setup english language and localization?
RE: Diagbox 7.83 software - Simple - 23-03-2017
(23-03-2017, 18:39 PM)blederik Wrote: Thank you I will try it...
1.) I would like to ask also if it is needful execute the command before instalation of Diagbox or can it be after?
2.) Can I execute command for more virtual maschines or only for one?
3.) Does it needfull to setup english language and localization?
1- No, you can execute that later.
2- Yes, for as many as you have.
3- No, I helped someone with French Windows.
RE: Diagbox 7.83 software - fifthelement89 - 18-07-2019
When installing this, the wifi must be off all times right?
And when message about firewall permission pops up should I accept it or no?