CarTechnoloGY
CGDI BMW Keytool Feedback - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: CGDI BMW Keytool Feedback (/showthread.php?tid=33808)

Pages: 1 2 3 4 5 6


CGDI BMW Keytool Feedback - ROD-BENDERS - 17-03-2018

All feedback from owners of CGDI BMW keytool post here please guys happy


RE: CGDI BMW Keytool Feedback - ahmadarifai - 19-03-2018

(17-03-2018, 17:31 PM)ROD-BENDERS Wrote:  All feedback from owners of CGDI BMW keytool post here please guys happy

Excellent tool so far. no bricks or problems.

extremely fast for cas1, 2 & 3

for cas3+ if need downgrade 10 minutes and seems safe, ISN read from DME 10 minutes does not support all DME is down side.

make sure you have proper power on the car

cas4 /+ did not check.


RE: CGDI BMW Keytool Feedback - slaw1971 - 19-03-2018

cas4 F10 - ok (new key)
cas4+ F10 - ok (new key) isn from org key or dump DME
fem/bdc F31 - ok - reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key


RE: CGDI BMW Keytool Feedback - Cniksor - 20-03-2018

i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.


RE: CGDI BMW Keytool Feedback - sunshine2018 - 03-04-2018

(20-03-2018, 07:30 AM)Cniksor Wrote:  i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Yes, you can reuse an old key and reprogram it.
and yes it is safe if downgrade for CAS3+.
Please believe me.cheers


RE: CGDI BMW Keytool Feedback - Cniksor - 07-04-2018

So I purchased the cgdi programer. I figured out how make key for cas2-3 but I can’t figure out how to use this programer for cas4? I tried looking online but only find for cas3,no instructions for cas4, can anyone tell me steps for cas4 I have f10 I can try one.


RE: CGDI BMW Keytool Feedback - rautolock - 07-04-2018

(07-04-2018, 06:06 AM)Cniksor Wrote:  So I purchased the cgdi programer. I figured out how make key for cas2-3 but I can’t figure out how to use this programer for cas4? I tried looking online but only find for cas3,no instructions for cas4, can anyone tell me steps for cas4 I have f10 I can try one.
Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generade key. It can no ne done by obd.

You need xprog or vvdi prog to read the dflash.

Sent from my Pixel 2 using Tapatalk


RE: CGDI BMW Keytool Feedback - HeXeN - 10-04-2018

CGDI BMW need to pay every 6 month subscription same as CGDI Mercedes ?


RE: CGDI BMW Keytool Feedback - slaw1971 - 11-04-2018

(10-04-2018, 21:47 PM)HeXeN Wrote:  CGDI BMW need to pay every 6 month subscription same as CGDI Mercedes ?

no
work like VVDI2 - synchronization every mounth


RE: CGDI BMW Keytool Feedback - HeXeN - 12-04-2018

Can you tell me if CGDI has same or more functions than vvdi2 bmw activation? thanks