VVDI Prog 35128WT on 35160DW - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: VVDI Prog 35128WT on 35160DW (/showthread.php?tid=63319) |
VVDI Prog 35128WT on 35160DW - smilo - 15-04-2022 Hi to all, Considering chips sizes, do you know if it's possible to copy 128WT to 160DW using VVDI prog ? Thanks RE: VVDI Prog 35128WT on 35160DW - lupu_sandu - 15-04-2022 35128 is double size as 35160, so you copy half of info RE: VVDI Prog 35128WT on 35160DW - smilo - 15-04-2022 Thank you. So what’s the solution for 35128WT ? RE: VVDI Prog 35128WT on 35160DW - Spitfire555 - 15-04-2022 (15-04-2022, 06:48 AM)smilo Wrote: So what’s the solution for 35128WT ? Use CG Pro, supporting 35128WT r/w RE: VVDI Prog 35128WT on 35160DW - smilo - 15-04-2022 (15-04-2022, 07:25 AM)Spitfire555 Wrote:(15-04-2022, 06:48 AM)smilo Wrote: So what’s the solution for 35128WT ? Thank you I also use CGPro with 35160 adapter. However, some chips are not supported. Even by heating to 100% before erase mileage. Do you have a solution for it ? RE: VVDI Prog 35128WT on 35160DW - laso - 15-04-2022 I do it like this: initialization of the device and then the memory soldered into the socket and set the hotair to 120 C and it heats up all the time. Then I set the milage to 100km and do write. I use hotair all the time during the process RE: VVDI Prog 35128WT on 35160DW - Spitfire555 - 15-04-2022 I don't heat the chip, but always use 16km (00h, 01h, 00h, 01h, ...) instead trying to erase for 0km. RE: VVDI Prog 35128WT on 35160DW - smilo - 15-04-2022 (15-04-2022, 09:14 AM)Spitfire555 Wrote: I don't heat the chip, but always use 16km (00h, 01h, 00h, 01h, ...) instead trying to erase for 0km. Thank you. 0km is not accepted in any case. I generally put 16 in mode 1, 32 in mode 2. Also in the past I used 1024, 4096, etc. (15-04-2022, 08:51 AM)laso Wrote: I do it like this: You solder the chip on a board connected to the adapter to be able to hit it all the reset time ? RE: VVDI Prog 35128WT on 35160DW - PsevDo - 15-04-2022 hello, this is 35128wt from g30 6WB cluster, which mode i must use for mileage reset, mode1 or mode2? mode's showing different milage which one showing true? RE: VVDI Prog 35128WT on 35160DW - BMWzone - 15-04-2022 It's Mode 1 with 16.400 Km |