[smilo]

Hi to all,
Considering chips sizes, do you know if it's possible to copy 128WT to 160DW using VVDI prog ? 
Thanks

[lupu_sandu]

35128 is double size as 35160, so you copy half of info

[smilo]

Thank you.
So what’s the solution for 35128WT ?

[Spitfire555]

So what’s the solution for 35128WT ?

Use CG Pro, supporting 35128WT r/w

[smilo]

So what’s the solution for 35128WT ?

Use CG Pro, supporting 35128WT r/w

Thank you

I also use CGPro with 35160 adapter. However, some chips are not supported. Even by heating to 100% before erase mileage.
Do you have a solution for it ?

[laso]

I do it like this:
initialization of the device and then the memory soldered into the socket and set the hotair to 120 C and it heats up all the time.
Then I set the milage to 100km and do write.
I use hotair all the time during the process

[Spitfire555]

I don't heat the chip, but always use 16km (00h, 01h, 00h, 01h, ...) instead trying to erase for 0km.

[smilo]

I don't heat the chip, but always use 16km (00h, 01h, 00h, 01h, ...) instead trying to erase for 0km.

Thank you.

0km is not accepted in any case. I generally put 16 in mode 1, 32 in mode 2. Also in the past I used 1024, 4096, etc.

---

I do it like this:
initialization of the device and then the memory soldered into the socket and set the hotair to 120 C and it heats up all the time.
 Then I set the milage to 100km and do write.
I use hotair all the time during the process

You solder the chip on a board connected to the adapter to be able to hit it all the reset time ?

[PsevDo]

hello, this is 35128wt from g30 6WB cluster, which mode i must use for mileage reset, mode1 or mode2? mode's showing different milage which one showing true?

[BMWzone]

It's Mode 1 with 16.400 Km