[smilo]

Hi to all,
DKombi installed on a F36 from 12-2016 equipped with HU_EntryNav (in replacement of BKombi).
The car has HK sound 688 (MOST bus working well), DKombi connected to MOST bus ring, but not detected in ECU list - no possible to code it. - sound is working fine.
Any idea why ?

I'm currently flashing to 03/2019 the HU - but not sure it will resolve the issue.

Thanks for your ideas

[smilo]

No idea from your side please ?
little urgent ..

[sebastianfernandes]

Probably first remove Bkombi from SVT and update VCM and then it should detect.
Does Bkombi still show up?

[dumitru.o]

before you can see the DKOMBI in the list, you need to code HU_EntryNav. Only after it's coded it will "talk" with the new DKOMBI. after coded, check manually by FDL coding and see if the line KOMBI_CIC is set to high.

report back!

[smilo]

Probably first remove Bkombi from SVT and update VCM and then it should detect.
Does Bkombi still show up?

before you can see the DKOMBI in the list, you need to code HU_EntryNav. Only after it's coded it will "talk" with the new DKOMBI. after coded, check manually by FDL coding and see if the line KOMBI_CIC is set to high.

report back!

Thanks for your reply.
Yes, the HU was coded with 6WB, but the VO doesn't help to map the HU with right FDL parameters (I guess because 6WB not expected for EntryNav - only EntryNav2) - then FDL was put manually for DKombi, but without success to detect the ECU.
Updating manually VCM helped to resolve -

---

Probably first remove Bkombi from SVT and update VCM and then it should detect.
Does Bkombi still show up?

Thanks very much

[jaramillo]

I have seen entrynav in conjuction with 6WB in F15, working without any trouble