Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Connect icom with tool32
24-08-2019, 11:06 AM,
Post: #1
Connect icom with tool32
How to connect icom with tool32.

All other programs like inpa, dr. Gini works whitout
problems.

Ediabas.ini

Remote and ip from icom and reserve in itoolradar,

But tool32 will not connect?
Quote this message in a reply
24-08-2019, 11:13 AM,
Post: #2
RE: Connect icom with tool32
use ediabas konfigurator 2.0 = REMOTE

idea Click @ Thanks & Rep. idea 
 -> MEGA   <--CREATE AN ACCOUNT YOURSELF 
Quote this message in a reply
24-08-2019, 13:41 PM,
Post: #3
RE: Connect icom with tool32
(24-08-2019, 11:13 AM)hashtagmaster Wrote:  use ediabas konfigurator 2.0 = REMOTE

I use REMOTE
Quote this message in a reply
24-08-2019, 14:38 PM,
Post: #4
RE: Connect icom with tool32
Instructions are easily found here on cartech..


Use itool radar, get IP.

Un easyconnect choose remote, type in IP address of ICOM, choose OBD_ab625

Lock (reserve) ICOM, click Check. Use INPA, NCS, WinKFP, tool32
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
24-08-2019, 18:57 PM,
Post: #5
RE: Connect icom with tool32
The easier way is to use dr.Gini.

Set your ICOM IP in Ediabas and then always when you want to connect with standard tools - just open dr.Gini > Interface > Allocate> Connect.

It will show KL15 and KL30 voltages when connection will be estabilished.

Close Dr.Gini and use whatever you want.

Only BMW services:

Remote coding/programming - E, F, G serie
HDD change, Carplay, Screen mirroring activation
FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS
Remote reset 8HP ISN F serie
ELV disable for CAS3, 3+
Quote this message in a reply
[+] 1 user says Thank You to Matthew53 for this post
25-08-2019, 04:51 AM,
Post: #6
RE: Connect icom with tool32
if inpa works, than tool32 have to also, maybe you have broken instalation
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [RESTARTED] icom next clone repair (only single pcb) ____ANGEL___ 52 5,475 Today, 00:46 AM
Last Post: faraz
  [MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 115 38,440 Yesterday, 16:31 PM
Last Post: hashtagmaster
  BMW ICOM NEXT ORI All LED RED aloxo 7 341 05-06-2024, 21:56 PM
Last Post: ferrum
  ICOM resetting with 4.47 mcrussell 14 766 04-06-2024, 12:01 PM
Last Post: NeRkO20
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 207 45,091 25-05-2024, 20:09 PM
Last Post: Neon10
  How to use ICOM with BMW VirtualGT1 qeen 0 125 09-05-2024, 18:55 PM
Last Post: qeen
XZBMW Inpa from Sedoy can't connect to any car Eyestorm 6 300 07-05-2024, 20:18 PM
Last Post: al70
XZBMW Poor wifi signal from new ICOM's bmchicago 3 391 12-04-2024, 18:55 PM
Last Post: Node
  Solved ✔ ICOM NEXT Error bmwcare 4 2,575 01-04-2024, 11:34 AM
Last Post: ivanp
  CCC flash WINKFP ICOM BimmerSLO 9 456 29-03-2024, 19:17 PM
Last Post: Hoborg

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content