Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
M5 F90 OPF/GPF removal with E-Sys?
19-09-2019, 14:08 PM,
Post: #1
|
|||
|
|||
M5 F90 OPF/GPF removal with E-Sys?
Hi
I'm trying to disable error codes related to OPF/GPF (particle filter) in M5 F90. Since early models weren't equipped with that, is it possible to modify FA and flash DME through E-Sys with software without OPF/GPF or something like that? Or is the only possible solution with Tuning Software? Thanks |
|||
19-09-2019, 19:42 PM,
Post: #2
|
|||
|
|||
RE: M5 F90 OPF/GPF removal with E-Sys?
You have a VIN from this car?
|
|||
19-09-2019, 20:01 PM,
Post: #3
|
|||
|
|||
RE: M5 F90 OPF/GPF removal with E-Sys?
|
|||
20-09-2019, 05:13 AM,
Post: #4
|
|||
|
|||
RE: M5 F90 OPF/GPF removal with E-Sys?
Maybe try replace 1DE(EU6 RDE) to 164(EU6) in FA, then calculate svt, and reflash DME?
|
|||
20-09-2019, 06:50 AM,
Post: #5
|
|||
|
|||
RE: M5 F90 OPF/GPF removal with E-Sys?
I suspect this parameter is the type that would lock after 10 operating hours on the DME. Tuning would likely be required, or reset operating hours and flash/recode.
|
|||
23-09-2019, 19:39 PM,
Post: #6
|
|||
|
|||
RE: M5 F90 OPF/GPF removal with E-Sys?
It is possibile to modify FA, but the DME may not accept the file. I think for sure it would be necessary to modify the production date (zeitkriterium) to a date before the GPF was introduced. And also, as already said by cursor, replace 1DE with 164 in FA. At that point with such a modified FA you could try to flash the DME.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content