[grizzle]

These are my photos.next time you can share it without adding anything on it.

Great! Could you explain how did it?

---

I don't understand your problem here. HOW are you sure from those photos that OABR is NOT connected? It looks like F3x and it could well be LCI which had Evo ID4 from factory, so WHY OABR would NOT be connected???

P.S. Even if it is not, HOW are you sure it was a FULL flash? If just language was flashed, it is much faster.

Yes i am sure its full flash id4-->id6.On F3x LCI Evo ,OABR is connected from factory?

---

The picture shows the ID4 host, and the factory OABR is in the connected state.

if its,thats flash able.

[Node]

I don't understand your problem here. HOW are you sure from those photos that OABR is NOT connected? It looks like F3x and it could well be LCI which had Evo ID4 from factory, so WHY OABR would NOT be connected???

P.S. Even if it is not, HOW are you sure it was a FULL flash? If just language was flashed, it is much faster.

Yes i am sure its full flash id4-->id6.On F3x LCI Evo ,OABR is connected from factory?

---

I see you have no idea what you are talking about. OF COURSE OABR is connected in ALL cars which have these units from factory!!! And then ZGM (or another gateway unit) forwards ethernet packets to/from the respective unit within a car. And there ARE OTHER units (at least on highly equipped cars) which are also connected to ethernet the same way within a car.

You DO NOT NEED to do any wire mangling on such cars to flash them over ethernet!

[grizzle]

I don't understand your problem here. HOW are you sure from those photos that OABR is NOT connected? It looks like F3x and it could well be LCI which had Evo ID4 from factory, so WHY OABR would NOT be connected???

P.S. Even if it is not, HOW are you sure it was a FULL flash? If just language was flashed, it is much faster.

Yes i am sure its full flash id4-->id6.On F3x LCI Evo ,OABR is connected from factory?

---

I see you have no idea what you are talking about. OF COURSE OABR is connected in ALL cars which have these units from factory!!! And then ZGM (or another gateway unit) forwards ethernet packets to/from the respective unit within a car. And there ARE OTHER units (at least on highly equipped cars) which are also connected to ethernet the same way within a car.

You DO NOT NEED to do any wire mangling on such cars to flash them over ethernet!

I Was confused because friend said to me before that"doesnt matter OABR Have or not". Thats why i wanted to ask it in here.
Thanks for answer.