[cupellete]

Hello everyone.
I have mounted a CIC navigation on an X3 F25.

I have changed ZGW, I have wired ENET from ZGW to CIC, I upgraded to latest SW version.

I have also installed combox.

With the BMWsweet tutorial, and with the intel123 tools. I have activated all certificates with esys. All are accepted.

It works everything ok, I've updated maps, it works combox, I've installed microphone as ISTA indicates.

MIC+ 17 (white)
MIC- 22 (green)
Shield 33

When I press the multifunction steering wheel button the beep sounds, but it does not recognize (or not hear) my voice.

I tested it with two different microphones, both work well in the combox, I can talk on the phone.

Can somebody help me?

[AjDiNi]

I have installed the Combox Media a few days ago in my Serie 3 E90, and for the mic pins i following this diagram wires.. All function perfectly... The Mic goes in the Combox socket, not in CIC.



Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

[SweetBMW]

What he said ^.

Cars with Cbox has mic wired to it. Not to head unit

[cupellete]

I installed the microphone in the combox. The problem is exactly the same. I still have no voice control...
I'm updating combox while waiting for a miracle

[Thorsten]

HI,

the VO has 620, SVS is set to aktiv and mic over most is set to aktiv, too?


Thorsten

[cupellete]

Combox updated, same problem.

HI,

the VO has 620, SVS is set to aktiv and mic over most is set to aktiv, too?


Thorsten

Thanks you for your answer,

add VO 620 was the first thing I tried, to my surprise, the X3 F25 Do not have option 620 in its catalog. I researched a little about it and I could see that the correct option is 6NS.

6NS = Enhanced Bluetooth telephone preparation with USB audio interface and Voice Control

That is already activated. But I have not tested with the MOST microphone option.
I will report.