[jojosqsq]

Hello

Can i retrofit 6wb F25 by vo coding.

- disassemble plug 6wa
- reassemble into new plug
- plug in 6wb
- add fa 6wb
- inject cafd
- code

Or only manual coding FDL.

if only FDL manual coding can help me with parameter to coding ?

Thanks you

[lynxbmw]

No, 6WB doesn't exist for F25. Some functions could be acquired by FDL coding.

[jojosqsq]

No, 6WB doesn't exist for F25. Some functions could be acquired by FDL coding.

Thanks you

Do you have FDL parameter to Coding.

[Mwahab]

Its doable, However there is no need to Reassemble any plug or such. just a long coding process.

[sebastianfernandes]

Had done a 6WB on an PRE LCI f25 recently.
Use FA from F10 to code the 6WB and inject CAFD. Modify it according to the options you have on your F25.
You cannot add 6WB to FA because it does not exist for F25. it will give out an error when you calculate FP.
You also need to modify the original SVT. Delete BKOMBI from SVT and UPDATE VCM. Then read ecu you should be then able see DKOMBI in ECU TREE. Without doing this it is impossible for the DKOMBI to show up.
Last but not the least ensure you have MOST FIBRE connected between CIC/NBT and DKOMBI.

Sorry saw that you have 6WA basically steps should be the same.

Good luck.

[jojosqsq]

Had done a 6WB on an PRE LCI f25 recently.
Use FA from F10 to code the 6WB and inject CAFD. Modify it according to the options you have on your F25.
You cannot add 6WB to FA because it does not exist for F25. it will give out an error when you calculate FP.
You also need to modify the original SVT. Delete BKOMBI from SVT and UPDATE VCM. Then read ecu you should be then able see DKOMBI in ECU TREE. Without doing this it is impossible for the DKOMBI to show up.
Last but not the least ensure you have MOST FIBRE connected between CIC/NBT and DKOMBI.

Sorry saw that you have 6WA basically steps should be the same.

Good luck.

Thanks you