Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F serie bench setup no image on monitor
24-12-2018, 09:17 AM,
Post: #1
|
|||
|
|||
F serie bench setup no image on monitor
I've a F series bench setup and when I connect a F10 cic with monitor on it the monitor doesn't go on.
My setup only contains a zgw module with most. In INPA I also don't see ignition signal. Pin 42 (ignition signal) on the zgw is connected to 12V. How can I get the monitor working? I've checked the wiring a couple of times of the monitor and it is correct. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
24-12-2018, 09:31 AM,
Post: #2
|
|||
|
|||
RE: F serie bench setup no image on monitor
You need to have either CAS or something else sending CAN signal on your bench. I use an arduino with mcp2515 can shield
Please, Press the Buttons and if you feel that this post helped you!
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Entrynav2 to NBT EVO retrofit, no rear view camera image | jce777 | 3 | 160 |
26-05-2024, 12:15 PM Last Post: bimmerlab |
|
ID8 with BCP on bench, can't turn on ignition | Matthew53 | 1 | 213 |
23-05-2024, 21:39 PM Last Post: Matthew53 |
|
Hud image not horizontal G05 | Fx82 | 2 | 149 |
20-05-2024, 20:25 PM Last Post: Fx82 |
|
ESys Launcher PRO Setup 2.8.1 | fengyonghua21 | 414 | 51,945 |
15-05-2024, 18:24 PM Last Post: Pommie |
|
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 846 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
BMW MGU HDD image | simaservis1108 | 3 | 409 |
26-04-2024, 06:29 AM Last Post: emhtuning |
|
MGU Bench connection | kimz | 4 | 591 |
22-04-2024, 17:06 PM Last Post: kimz |
|
bmw hdd image need | saninpwnzor | 2 | 277 |
21-04-2024, 22:22 PM Last Post: saninpwnzor |
|
1 serie F40 coding help | nixte | 1 | 182 |
08-04-2024, 17:16 PM Last Post: Fatalix |
|
Test bench Connection to CAN ECU's | HaakonA | 3 | 339 |
03-04-2024, 07:24 AM Last Post: sixcode |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content