[emhtuning]

The R270 can change VIN in WT Eeprom, but no mileage.  Mk2 Codiprog can also delete only VIN and no mileage.  But the Mk2 can read WT and describe emulators, nothing more.
Even if the station wagon with the WT has a lower mileage than the vehicle, it is not enough to delete only VIN, the red dot remains mostly.  Furthermore, the service can not be reset.  It also brings nothing to flatten the combo or the well-known eeprom 95320 delete.  Some say they did it that way, but I doubt that.
Furthermore, the mileage in the station wagon is displayed correctly, but only visually and not firmly written.

time to change your Translator dude     , Kombi in Deutsch is instrument cluster in English , not station wagen .. loool , sorry but I had to mention this ,

I know many people already done WT chip mileage and VIN reset with VVDI . I haven't done it personally because I don't have VVDI but it has been done already .

I was offered a second hand F30 6wb in virgin state , but the price was not far from a brand new kombi from https://www.leebmann24.de/

[Stromag]

Yes I have to get used to writing instrument cluster

[smilo]

with VVDI, what bother me is the need of the eeprom replacement - erasing mileage with VVDI on WT itself is also not possible.
With CG Prog I heard that some people succefully done the flash with the new adapter, but it doesn’t works 100% of time ..

[RocketSurgeon]

with VVDI, what bother me is the need of the eeprom replacement - erasing mileage with VVDI on WT itself is also not possible.
With CG Prog I heard that some people succefully done the flash with the new adapter, but it doesn’t works 100% of time ..

CG Pro doesn't even work 5% of the time for WT. Nobody can erase that chip with any reliability, so cloning to the vvdi eraseable chip seems like the best option.

[smilo]

with VVDI, what bother me is the need of the eeprom replacement - erasing mileage with VVDI on WT itself is also not possible.
With CG Prog I heard that some people succefully done the flash with the new adapter, but it doesn’t works 100% of time ..

CG Pro doesn't even work 5% of the time for WT. Nobody can erase that chip with any reliability, so cloning to the vvdi eraseable chip seems like the best option.

Need VVDI with a special adapter + 35160WD chip, or VVDI in standard configuration is enough ?
Which tool do you use to desolder/solder eeprom ?