Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Help! NBT Evo + ATM Retrofit GPS Status "Reserved"
06-12-2018, 12:44 PM,
Post: #1
XZBMW  Help! NBT Evo + ATM Retrofit GPS Status "Reserved"
Hi,

I have done a few of evo + atm retrofits without any issue however when i retrofitted one yestersay its not working. When I check the atm module with tool32 it says "3d fix" but on the nbt evo it says "Reserved"

I previoulsy have used emulator to keep the connected drive/remote services and it all worked fine but customer wanted FSC codes and no emulator and wasn't botherd about remote services. Could it be that without the emulator it wouldn't comunicate the gps data.

Any help or ideas would be appriciated.

Thanks
Quote this message in a reply
08-12-2018, 11:07 AM,
Post: #2
XZBMW  RE: Help! NBT Evo + ATM Retrofit GPS Status "Reserved"
I have an ATM unit with the same fault, I have flashed the ATM the the latest i-level to match the EVO but error still exists, I think the ATM is faulty as I tried another unit & GPS shows immediately
Quote this message in a reply
[+] 1 user says Thank You to mcrussell for this post
08-12-2018, 22:44 PM,
Post: #3
RE: Help! NBT Evo + ATM Retrofit GPS Status "Reserved"
Hi,

Thanks for the respone, ill try another unit and see if that will fix it
Quote this message in a reply
24-09-2022, 13:20 PM,
Post: #4
RE: Help! NBT Evo + ATM Retrofit GPS Status "Reserved"
Hello everybody, I'm writing here (even if this topic seem to be out of date) for the same problem:

F33, NBT EVO HU and GPS receiver in ATM box in the trunk;
In Ista I see in ATM value 3D Fix, but in HU menu service no satellites value (all value in ---) and GPS is "reserved";
The trouble is: "car position on the map always static, no change driving"
VIN is ok in HU and ATM
Online service backend launched by Ista are: ok for ATM, error for HU.
Bluetooth and SOS are ok (ATM)
In laboratory using ATM emulator in 3 minutes GPS fix done and data passed @ the HU upgrading position on map.
Regularly programmed and coded all ECU @ last I level 22-07-530, no error in ECU's tree.

May be also for my case ATM-TCB damaged even without error?
To sum up seem that my ATM is not passing GPS data @ the HU, emulator do.
HELP to everybody!!!

Thanks.
P.S. my HU and ATM are native, FSC all ok, no retrofit.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW e87 LCI hralights retrofit problem XeoN 1 52 31-05-2024, 14:40 PM
Last Post: wrp_199
XZBMW E39 Rain Light Sensor / Auto Headlight Retrofit Coding bmw335coding 1 68 31-05-2024, 06:43 AM
Last Post: Vojno
XZBMW Neck warmer retrofit Just2fast5 13 620 27-05-2024, 20:26 PM
Last Post: Node
XZBMW F25 Hud retrofit with EVO and 6WB kombi coding simplextibi 0 64 26-05-2024, 15:54 PM
Last Post: simplextibi
XZBMW Entrynav2 to NBT EVO retrofit, no rear view camera image jce777 3 157 26-05-2024, 12:15 PM
Last Post: bimmerlab
  F20 cruise control retrofit maninblack 6 208 24-05-2024, 16:26 PM
Last Post: maninblack
  BMW F31 acc retrofit help Pedrom92 10 1,408 23-05-2024, 22:56 PM
Last Post: azwgh
XZBMW G30 Entrynav2 - rear camera retrofit problem Krysiaman 19 1,401 23-05-2024, 20:39 PM
Last Post: Node
ZBentley Tool to use to cut leather dashboard for hud retrofit Fx82 3 325 19-05-2024, 15:29 PM
Last Post: Fx82
XZBMW F01 LCi Xenon Headlight Retrofit mcrussell 0 59 16-05-2024, 11:57 AM
Last Post: mcrussell

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content