[brag288]

Running into a weird issue.
I have made a bench test with a cas4(auto trans,no elv required) and a zgw-02 high(has most port as well)
I have the ring aerial connected,the start button,can2 between zgw and cas,power connected ground connected.
the cas i bough came without a key,so i made a new one.
Here is where the funny stuffs happens. 
I know when the cas and zgw turn on because the start button light comes on and zgw most light comes on.
But after 10-15 seconds it switches off and i press the start button it turns on again for 10-15 seconds and back off.
Also the cas doesnt want to learn the new key.
Its like the cas doesn't turn on properly and quickly turns off.
To make things even more strange,i can connect with esys and see the modules as long as i keep pressing the start button so the cas and zgw stay awake.
What am i missing because this is driving me nuts.

[jaramillo]

Use a can ignition emulator... Issue will be solved

[brag288]

Use a can ignition emulator... Issue will be solved

I need cas to be working so ignition emulator is not an option

[brag288]

Update : Everything is working now.
No idea where the issue was.
I connected kombi and everything started working.
Just to test even more,i disconnected kombi and everything is still working as intended

[kimz]

Next time just check your wiring and 15wup connection, this keep ecus alive when ignition is turned on

[brag288]

Next time just check your wiring and 15wup connection, this keep ecus alive when ignition is turned on

believe me i checked and verified everything before posting...no idea what happened first time...it just wouldnt learn the remote until i had the kombi connected as well.

[brahem]

Running into a weird issue.
I have made a bench test with a cas4(auto trans,no elv required) and a zgw-02 high(has most port as well)
I have the ring aerial connected,the start button,can2 between zgw and cas,power connected ground connected.
the cas i bough came without a key,so i made a new one.
Here is where the funny stuffs happens. 
I know when the cas and zgw turn on because the start button light comes on and zgw most light comes on.
But after 10-15 seconds it switches off and i press the start button it turns on again for 10-15 seconds and back off.
Also the cas doesnt want to learn the new key.
Its like the cas doesn't turn on properly and quickly turns off.
To make things even more strange,i can connect with esys and see the modules as long as i keep pressing the start button so the cas and zgw stay awake.
What am i missing because this is driving me nuts.

hi

for bench setup what do we need exactly?

CAS4 ZGW(any?) JBBFE (any?),
Cluster + start stop und ign


do we need more?
what about the pinout ?

thks