Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW G01 6WB retrofit
24-02-2023, 19:32 PM,
Post: #1
|
|||
|
|||
BMW G01 6WB retrofit
Hello,
After 6WB retrofit, when car run into sleep mode, DKOMBI every time loose cafd. All fault codes said about VIN and mileage mismatch, but after cafd injection there is no any fault codes and everything works great until sleep mode. I already flashed DKOMBI into last i-step (same problem). EEPROM 35128WT type 2, virginize was doing two times, first time only VIN and second time all EEPROM memory rewriting like new cluster (same problem). Maybe someone has same problem? Thanks! |
|||
24-02-2023, 19:42 PM,
Post: #2
|
|||
|
|||
RE: BMW G01 6WB retrofit
Take a look about EEPROM if solder is okay or nope second one what tool are you using for virginizing it
Reset ISN 6\8hp
Remote Support MGU Patch\Virginising\CP OFF NCD 2.0 Sign KAFAS\MRR\RAM Virginising Remote Tuning Pops&Bangs\Stage1-2-3 WP:+7 981 917-44-85 IG: @eengineer.x |
|||
24-02-2023, 19:50 PM,
Post: #3
|
|||
|
|||
RE: BMW G01 6WB retrofit
(24-02-2023, 19:42 PM)EngineerX Wrote: Take a look about EEPROM if solder is okay or nope second one what tool are you using for virginizing it Soldering seems ok, first time with VVDI prog, second I don't know because it done by professional programmer. |
|||
24-02-2023, 19:57 PM,
Post: #4
|
|||
|
|||
RE: BMW G01 6WB retrofit
Send here eeprom bin
Reset ISN 6\8hp
Remote Support MGU Patch\Virginising\CP OFF NCD 2.0 Sign KAFAS\MRR\RAM Virginising Remote Tuning Pops&Bangs\Stage1-2-3 WP:+7 981 917-44-85 IG: @eengineer.x |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content