Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Entrynav2 bench
|
27-11-2023, 10:07 AM,
Post: #1
|
|||
|
|||
|
Entrynav2 bench
I have an Entrynav2 unit bench. I use FEATURE (FSC set), without success.
ZGW and CPS VIN matching. Entrynav2 software 17/3 any idea? |
|||
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
27-11-2023, 10:37 AM,
Post: #2
|
|||
|
|||
RE: Entrynav2 bench
(27-11-2023, 10:07 AM)Jalami Wrote: I have an Entrynav2 unit bench. I use FEATURE (FSC set), without success. if i don't remeber wrong... feature installer on entrynav2 unit require an istep newer than 23-03 FB & IG PRZPERFORMANCE - Brescia - Italy
|
|||
|
27-11-2023, 13:22 PM,
Post: #3
|
|||
|
|||
RE: Entrynav2 bench
(27-11-2023, 10:37 AM)parzo93 Wrote:(27-11-2023, 10:07 AM)Jalami Wrote: I have an Entrynav2 unit bench. I use FEATURE (FSC set), without success. Not the case, you can install on older firmware than 23-03. Have you tried clearing the FSC's with Feature installer? Author of Car Connector - remote ICOM & ENET tool - Built in VPN for easy coding and remote diagnostics Closed Beta in progress - Open Beta starting Jan 2024. |
|||
|
27-11-2023, 13:49 PM,
Post: #4
|
|||
|
|||
|
RE: Entrynav2 bench
Read fault codes of HU and you will understand why fsc gets rejected.
Last image should be OK;x where X is number of job you wish |
|||
|
27-11-2023, 15:18 PM,
Post: #5
|
|||
|
|||
|
RE: Entrynav2 bench
you can't activate it on bench, only in car. FSCs will get rejected even when VINs do match. same with MGU bench.
MGU(ID7, ID8) Patching/Virginizing.
Feature Installer codes. KAFAS4 Virginizing. Physical head unit Repairs. CarPlay activations(EVO,ENAV2,MGU). Remote BMW Coding.  [email protected] |
|||
|
|
27-11-2023, 15:34 PM,
Post: #6
|
|||
|
|||
RE: Entrynav2 bench
(27-11-2023, 15:18 PM)RuleNormaliai Wrote: you can't activate it on bench, only in car. FSCs will get rejected even when VINs do match. same with MGU bench. that's 100% incorrect in both His Coding 2.0 File Service - Region Change/Typekey - SFA iDrive 8.5 REGION CHANGE
BMW Full FSC Set + CarPlay - NBT EVO ID4/5/6/ENTRYNAV2 (CP REMOVE/PATCH) MGU CARPLAY/ANDROID AUTO Activation / MGU PATCH/CP REMOVE (EU service) ISN RESET Remote F/G series BMW KAFAS 2/4 FSCs(7E/BE/BF - 11F/13E/13F) BMW KAFAS4/MRR/RAM Virgin / VIN FSC Matching |
|||
|
27-11-2023, 16:15 PM,
Post: #7
|
|||
|
|||
RE: Entrynav2 bench
(27-11-2023, 15:34 PM)dasi Wrote:(27-11-2023, 15:18 PM)RuleNormaliai Wrote: you can't activate it on bench, only in car. FSCs will get rejected even when VINs do match. same with MGU bench. can you explain then why FSCs are being rejected on both of these units when HU, GW and FSC VINs match? MGU(ID7, ID8) Patching/Virginizing.
Feature Installer codes. KAFAS4 Virginizing. Physical head unit Repairs. CarPlay activations(EVO,ENAV2,MGU). Remote BMW Coding. [email protected] |
|||
|
|
|
27-11-2023, 17:17 PM,
Post: #8
|
|||
|
|||
|
RE: Entrynav2 bench
SOLVED.
with 23/3. bench coded VO. F30. Fsc after rebooting the unit are rejected. |
|||
|
27-11-2023, 17:34 PM,
Post: #9
|
|||
|
|||
|
RE: Entrynav2 bench
If all done correctly, with the current i-step, it should work on zgw bench. FSC's will be accepted in the car after sleep.
|
|||
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
