Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
MW F30 2014 FEM Replacement – Comfort Access and Remote Key Not Working
|
28-06-2026, 05:07 AM,
Post: #1
|
|||
|
|||
|
MW F30 2014 FEM Replacement – Comfort Access and Remote Key Not Working
Hi everyone. I need your help.
BMW F30, 2014. After replacing the FEM module, Comfort Access and the key buttons (lock/циLoск) stopped working. A used FEM was installed, and option 322 (Comfort Access) is present in the module. The FEM replacement was done with ACDP. The key is an original HUF5767, 434 MHz. I tried renewing (resetting) the key using both ACDP and CG Pro, but the result was the same. The key itself is working. The original FEM could not be cloned because it was damaged and its data could not be read. Has anyone experienced this issue or knows what could be causing it? |
|||
|
|
28-06-2026, 10:19 AM,
(This post was last modified: 28-06-2026, 10:25 AM by bm92.)
Post: #2
|
|||
|
|||
|
RE: MW F30 2014 FEM Replacement – Comfort Access and Remote Key Not Working
1. program a new key
2. wrong FEM hardware 3. wrong coding/VO/FA/SVT 4. maybe you lost remote data sync -Secure Coding NCD 2.0, SFA, SecOC, Certificate Validation CBB
-MRR, RAM, BDC, BCP, Kombi Live Cockpit, Kafas2, Kafas4, SLI, LDW, LCW... Remotely via OBD -EGS ISN F/G series, DKG1/DKG2, 6HP/8HP, 7DCT300, EGS7 Remotely via OBD -DME/DDE ISN MDG1, EDC16, EDC17, MEVD17xx, MSVxx, MSDxx Remotely via OBD -CAS1, CAS2, CAS3, CAS4 -MGU Carplay Android Auto with/without ATM(6AE) Remotely via OBD -Wifi port retrofit EntryNav2 Enavevo -BMW Mini flash iD4 to iD6, Carplay activation Remotely via OBD -ратсн OBD Remotely MGU, CIC, NBT, NBT Evo iD4 iD5 iD6 EntryNav2(EnavEvo), full f5с set, remove Component Protection(CP) -EGS Alpina Flash tune Remotely via OBD -Fxx GTS/CS Flash tune Remotely via OBD -Gxx M2 M3 M4 to CS software update 530HP 650NM, OPF FAP delete Remotely via OBD and more... Whatsapp: Send PM first |
|||
|
|
|
29-06-2026, 09:58 AM,
Post: #3
|
|||
|
|||
|
RE: MW F30 2014 FEM Replacement – Comfort Access and Remote Key Not Working
I finally solved the problem using VVDI Key Tool Mini. CG Pro and ACDP were not able to renew the key correctly.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
Rufat106, 4 Guest(s)
Rufat106, 4 Guest(s)
Return to TopReturn to Content
