Possibly Related Threads…

***oceandiver86*** · 07-03-2018, 15:33 PM,

Did you code the amp with NCS to your car/FA after the flash?

***Mizta Insane*** · 07-03-2018, 15:41 PM,

Yes, I did flash in expert mode.

I did a default but I did not copy over the FA/VO.

I thought only FRM and CAS needed that info...

***Hoborg*** · (This post was last modified: 07-03-2018, 16:27 PM by Hoborg.)

The radio has little to do with this amplifier, check or try to encode the CCC / CIC.

***Mizta Insane*** · (This post was last modified: 09-03-2018, 21:03 PM by Mizta Insane.)

(07-03-2018, 16:26 PM)Hoborg Wrote: The radio has little to do with this amplifier, check or try to encode the CCC / CIC.

Thank you, I’ll try that.

UPDATE: I defaulted the CIC and still no audio from AM/FM. audio from other sources (aux/usb) works ok.

***Mizta Insane*** · 12-03-2018, 16:55 PM,

Bump with update

***lynxbmw*** · 12-03-2018, 17:01 PM,

(12-03-2018, 16:55 PM)Mizta Insane Wrote: Bump with update

Drop me PM, I may have a look.

***Hoborg*** · 13-03-2018, 07:30 AM,

(09-03-2018, 03:46 AM)Mizta Insane Wrote:
(07-03-2018, 16:26 PM)Hoborg Wrote: The radio has little to do with this amplifier, check or try to encode the CCC / CIC.

Thank you, I’ll try that.

UPDATE: I defaulted the CIC and still no audio from AM/FM. audio from other sources (aux/usb) works ok.

So , problem is with Your CIC not with AMP.

***vneno*** · 13-04-2018, 18:37 PM,

(09-03-2018, 03:46 AM)Mizta Insane Wrote:
(07-03-2018, 16:26 PM)Hoborg Wrote: The radio has little to do with this amplifier, check or try to encode the CCC / CIC.

Thank you, I’ll try that.

UPDATE: I defaulted the CIC and still no audio from AM/FM. audio from other sources (aux/usb) works ok.

I have similar issues. Do you have any solution?

***Mizta Insane*** · 13-04-2018, 20:29 PM,

(13-04-2018, 18:37 PM)vneno Wrote:
(09-03-2018, 03:46 AM)Mizta Insane Wrote:
(07-03-2018, 16:26 PM)Hoborg Wrote: The radio has little to do with this amplifier, check or try to encode the CCC / CIC.

Thank you, I’ll try that.

UPDATE: I defaulted the CIC and still no audio from AM/FM. audio from other sources (aux/usb) works ok.

I have similar issues. Do you have any solution?

I had to replace the amp in the end. once i replaced the amp everything started to work as it should.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Flashing F26 DME software into F22?	Krysiaman	4	146	14-05-2024, 17:40 PM Last Post: ruben_17non
	Flashing hybrid cars with E-sys	ravager	0	189	18-04-2024, 09:51 AM Last Post: ravager
	Flashing a stock box map to an E60 with XHP?	GoNz0-	10	488	20-03-2024, 09:33 AM Last Post: tomaxsas
	flashing modules hw-id	redog4dy	5	395	04-03-2024, 13:26 PM Last Post: redog4dy
	Power supply for coding flashing	kklobo	14	1,076	29-02-2024, 08:37 AM Last Post: nBlacky
	problem with flashing CHAMP2 module (the programming dependencies are not correct)	azwgh	17	967	11-02-2024, 19:39 PM Last Post: azwgh
	CAS 3 need repair after flashing	stydly	10	582	02-02-2024, 15:43 PM Last Post: 16eddi67
	f10 2011, flashing zgw	redog4dy	2	234	18-01-2024, 10:19 AM Last Post: redog4dy
	E-Sys flashing with "hwDeinstall" and "hwInstal"	cm048	7	2,869	10-01-2024, 08:56 AM Last Post: Node
	Request Psdzdata for flashing NBT EVO and EntryNav2 Latest version	jojosqsq	2	330	30-12-2023, 10:49 AM Last Post: Fx82

Contact Us