Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Connect icom with tool32
24-08-2019, 11:06 AM,
Post: #1
|
|||
|
|||
Connect icom with tool32
How to connect icom with tool32.
All other programs like inpa, dr. Gini works whitout problems. Ediabas.ini Remote and ip from icom and reserve in itoolradar, But tool32 will not connect? |
|||
24-08-2019, 11:13 AM,
Post: #2
|
|||
|
|||
RE: Connect icom with tool32
use ediabas konfigurator 2.0 = REMOTE
Click @ Thanks & Rep.
* BUY -> MEGA.nz Account CREATE AN ACCOUNT YOURSELF - GET THE DATA INTO YOUR ACCOUNT - OFFER IT TO SOMEONE ELSE FROM THERE |
|||
24-08-2019, 13:41 PM,
Post: #3
|
|||
|
|||
RE: Connect icom with tool32
|
|||
24-08-2019, 14:38 PM,
Post: #4
|
|||
|
|||
RE: Connect icom with tool32
Instructions are easily found here on cartech..
Use itool radar, get IP. Un easyconnect choose remote, type in IP address of ICOM, choose OBD_ab625 Lock (reserve) ICOM, click Check. Use INPA, NCS, WinKFP, tool32 |
|||
24-08-2019, 18:57 PM,
Post: #5
|
|||
|
|||
RE: Connect icom with tool32
The easier way is to use dr.Gini.
Set your ICOM IP in Ediabas and then always when you want to connect with standard tools - just open dr.Gini > Interface > Allocate> Connect. It will show KL15 and KL30 voltages when connection will be estabilished. Close Dr.Gini and use whatever you want. Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
25-08-2019, 04:51 AM,
Post: #6
|
|||
|
|||
RE: Connect icom with tool32
if inpa works, than tool32 have to also, maybe you have broken instalation
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content