Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E60 4x4 remove
17-01-2019, 00:32 AM,
Post: #1
|
|||
|
|||
E60 4x4 remove
Hello.I have a problem with code off 4x4 in e60 325xi 2006y i remove from cas option $203 and code car but in abs show always communicate transfer box so i change abs pump with diffrent nr and errors gone on dash but if drive 20 km\h show dtcs and error 5E5C and see in live data front wheels if i drive forward front wheels see i drive backward but why i change abs sensor from non xi model and same result what now i must change for correct show in live data ?
|
|||
17-01-2019, 01:03 AM,
Post: #2
|
|||
|
|||
RE: E60 4x4 remove
update ecus with FA changed by proper sw...coding sometimes not inuf
|
|||
17-01-2019, 01:08 AM,
(This post was last modified: 17-01-2019, 01:11 AM by juve18.)
Post: #3
|
|||
|
|||
RE: E60 4x4 remove
Not coding ? So i must flash all modules? If i change fa and in istaP show me abs orginal replace so i replaced maybe 10 modules of abs and on 1 erros gone but if i drive show again
And i have same car same engine and year without 4x4 i change abs from this car to my and error is same so i don't now how to do it must be mechanicaly diffrent |
|||
17-01-2019, 01:26 AM,
(This post was last modified: 17-01-2019, 01:27 AM by Silva1337.)
Post: #4
|
|||
|
|||
RE: E60 4x4 remove
if you do not know what to flash you can calculate plan with ista-p than flash with winkpf.
ista will generate depending on VO |
|||
17-01-2019, 01:36 AM,
(This post was last modified: 17-01-2019, 01:40 AM by juve18.)
Post: #5
|
|||
|
|||
RE: E60 4x4 remove
I now how to flash and calculate with istap but if ista calculate me new nr for abs and only calculate for exchange i cannot see in winkfp from ista nr and i have newest database so i decided change abs for other nr
Old abs cannot reflashing with ista or winkfp must change for other but don't now nr |
|||
17-01-2019, 01:51 AM,
Post: #6
|
|||
|
|||
RE: E60 4x4 remove
(17-01-2019, 01:36 AM)juve18 Wrote: I now how to flash and calculate with istap but if ista calculate me new nr for abs and only calculate for exchange i cannot see in winkfp from ista nr and i have newest database so i decided change abs for other nr Iven if module marked as replacement its 50/50 will work with proper flash..in winkfp you have to use expert mode |
|||
17-01-2019, 01:54 AM,
Post: #7
|
|||
|
|||
RE: E60 4x4 remove
|
|||
18-01-2019, 09:07 AM,
Post: #8
|
|||
|
|||
RE: E60 4x4 remove
Yes but this soft not solve my problem i have mechanicaly fault 4x4
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content