[xxiFear]

How long does it usually take using KWP2000 ? For NBT?

As for 3.27.1 - How long does that take to flash?

Ps. I'm using Esys 3.33.0 but I preffer 3.27.1
If I use the Tal that was generated with 3.33.0, can I use that for flashing?

Since I use 4.19.30 pszdata?

I don’t know about KWP2000...
HTTP around 20-30 minutes I guess. Depends on your computer specs.
Yes that’s what I wrote. You can take the 3.33 TAL for 3.27...

what is the issue with 3.33.0 and flashing the NBT trough HTTP?

Most of the time it aborts flashing with HTTP Error

[oceandiver86]

what is the issue with 3.33.0 and flashing the NBT trough HTTP?

Most of the time it aborts flashing with HTTP Error
[/quote]

Same with ICOM or only ENET?

[xxiFear]

what is the issue with 3.33.0 and flashing the NBT trough HTTP?

Most of the time it aborts flashing with HTTP Error

Same with ICOM or only ENET?
[/quote]

Haven’t flashed with icom. Only enet

[emhtuning]

I get HTTP error 99% of the time with NBT flashing using 3.33 , I tried ICOM and Enet / with and without router same results .

with 2.37.1 no HTTP error but I generally use ICOM connected to router because this is how I have my setup as I use WIFI in the place with many laptops .

[Ibrahim24]

So when I calculate tall in esys 3.33.0 I can use this in Esys 2.7.1.

But does this count for full PSDZdata 4.19.40?
Can I use this for flashing?