[sebastianfernandes]

Good Day
As title says I have an strange issue with F90 laser light retrofit. Done all wiring as per Carsystems.ua instructions. Flashed and coded FLE modules with LCI FA.
FLM2 brand new and also headlights ordered from BMW.
FLM2 is HWEL 000081D2-100-001-000 which is correct for laser lights as calculation with Esys shows it.
BDC2 also updated to latest ilevel because also retrofit LCI tail lights. No issues with tail lights.
Ista shows strange error with High Beam laser: locking of laser system active.
Calculating test plan does not show anything.
I have added manually the Data Matrix code for each headlight using ABL in Ista. Before this was also another error about classification of resistor that disappeared after inputting the numbers from both headlights. Input 10 digit and 3 digit number, since I don't have the QR scanner. Attached pic of the code. It show successful but still fault persists. Adaptive headlight error and high beam left and right error on dash.
Headlight do work low and high beam but no adaptive function.
Part numbers for Headlight and FLM2 modules are correct as per ETK.
Any ideas?

[iyade46]

can i check the car with teamviwer ?

[sebastianfernandes]

Hi I contact you with your skype.

[sebastianfernandes]

Fixed it! All working as normal.
Please close thread.