Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Which power supply for programming
12-03-2017, 21:47 PM,
(This post was last modified: 12-03-2017, 21:52 PM by DNK76.)
Post: #81
|
|||
|
|||
RE: Which power supply for programming
Take two at 65A
plus-plus minus minus and you have a 130A a small voltage drop is provided -grube cables and short after 50cm copper 25mm2 -very strong żabki I at 20A is approximately 0.2V 40A at about 0,3V 65A with a drop to 13V (from 13.5) This Tyll as E91 N47 launch of all all the lights, passing, traffic, directions, fog, automatic climate control on ful windows front and rear, heated seats radio on full only 65A not possible to obtain such tension I can jescze more ista D run windmill air conditioning on full 87A is about nothing more I can not in E91 Normally this e90 8A-17A (jump to 45A) e60 15A- max25A (sometimes jump up to 45 A up to 60A) F30 15A -25 - (like) basically 50A is sufficient and the rest of the reserve, Remember that the battery can not be discharged even though they are DC power supplies and battery is only recharged This large current consumption is sighted by IBS and will show a battery error (For KL15) The power supply is not the battery charger AGM to 14.9V current 1/10 max capacity of the battery is 1 / 4akumulatora more can damage the battery, because the power supply set to a lower voltage 13.8V to 14V or safer the latest series BMW only 14V max If my post helped you hit the thanks and reputation button!
|
|||
12-03-2017, 23:12 PM,
Post: #82
|
|||
|
|||
RE: Which power supply for programming
Hi all.
I use this is power supply.. IBM Delta 2000W Power Supply 24R2711 24R2710 DPS-2000BB A H18657B Must be little modify.. I put the old ups case .. Origi parameter 12V 164A must be soldering resistor after have 14.5V I try test.. 120A easy working.. i test all day.. good work without problem If car engine start.. power supply off.. must be restart the power supply.. I think very little price and very good power. |
|||
Reputation: +1 - ROD-BENDERS [+1] | |||
12-03-2017, 23:19 PM,
Post: #83
|
|||
|
|||
RE: Which power supply for programming
I have been using gysflash 100 - 12 for a couple of years now and it is sufficient
All VAG immobiliser adaptations here.
Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
13-03-2017, 01:52 AM,
Post: #84
|
|||
|
|||
RE: Which power supply for programming
I made a few modifications to my kd175 which appear to have improved the voltage regulation slightly. At no load it runs exactly 14v, and with all loads on (e90) drops to 13.15v as read by my ICOM. I'm pretty happy with that. If anybody wants a Dell KD175, it's the same thing as the Intel AHW6UPWR. I got mine for $17 shipped.
|
|||
13-03-2017, 02:31 AM,
Post: #85
|
|||
|
|||
RE: Which power supply for programming
|
|||
13-03-2017, 07:52 AM,
(This post was last modified: 13-03-2017, 08:11 AM by botho.)
Post: #86
|
|||
|
|||
Which power supply for programming
|
|||
13-03-2017, 15:55 PM,
Post: #87
|
|||
|
|||
RE: Which power supply for programming
Where did you found it at that price?
|
|||
13-03-2017, 16:37 PM,
Post: #88
|
|||
|
|||
RE: Which power supply for programming
|
|||
13-03-2017, 19:34 PM,
Post: #89
|
|||
|
|||
RE: Which power supply for programming
(13-03-2017, 15:55 PM)lagunasec Wrote: Where did you found it at that price? French site with free shipping in France (www.comptoirdespros.com) |
|||
Reputation: +1 - JarsaR [+1] | |||
15-03-2017, 09:55 AM,
(This post was last modified: 15-03-2017, 09:55 AM by aboulfad.)
Post: #90
|
|||
|
|||
RE: Which power supply for programming
(12-03-2017, 23:19 PM)Buzzard Wrote: I have been using gysflash 100 - 12 for a couple of years now and it is sufficient (13-03-2017, 19:34 PM)botho Wrote:I guess both of you are in Europe or in a country that runs 220V as that charger runs on 230V. For those that aren't francophone, here's the direct link to that charger. For 50A, it's 375Eur, close price to the Schumacher INC-700, but not as close as to my 50Eur home made one(13-03-2017, 15:55 PM)lagunasec Wrote: Where did you found it at that price? |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
e90 2005, power window relay, driver's side, rear | redog4dy | 8 | 92 |
14-06-2024, 11:03 AM Last Post: bmchicago |
|
2011 BMW 335d no power cant rev over 1600 rpm | koziol | 1 | 94 |
11-06-2024, 23:07 PM Last Post: Marx |
|
ISTA 4.33.30 The programming system could not be initialised | Edward1968 | 40 | 8,736 |
01-06-2024, 09:50 AM Last Post: iyade46 |
|
ISTA 4.47 programming N/A | Neon10 | 7 | 576 |
28-05-2024, 07:46 AM Last Post: Thomas77 |
|
2002 bmw e46 with no power to fuses 1-15 | busaman | 3 | 128 |
20-05-2024, 16:09 PM Last Post: NOAH_G |
|
bmw e90 a731 terminal 30g_f idrive no power | mercuris | 5 | 310 |
23-03-2024, 16:03 PM Last Post: mercuris |
|
Solved ✔ ISTA Standalone WLAN programming | botho | 4 | 437 |
21-03-2024, 11:13 AM Last Post: botho |
|
F15 Programming Error | mcrussell | 7 | 543 |
20-03-2024, 05:38 AM Last Post: SweetBMW |
|
BMW X6 E71 Programming | Ryzen | 5 | 339 |
16-03-2024, 12:42 PM Last Post: Node |
|
Power supply for coding flashing | kklobo | 14 | 1,098 |
29-02-2024, 08:37 AM Last Post: nBlacky |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content