Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
12-09-2018, 10:23 AM,
Post: #681
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
You should flash the cic.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
12-09-2018, 13:03 PM,
Post: #682
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
hello
i have a little problem with writing FSC 9C to my CIC professional with C1A SW. i was able to change the vin of the CIC to match the car and write the FSC`s + Certificates to my CIC so navigation and Voicecontrol is working without EMU or script. my issue now is that whenever i try to do a read or store to the 9C i get an error 10802. i attached two screenshots, one of the error message, as said with other FSC`s it was working fine. and a second with the FSC overview. ah, and is there a list of explaination of the other FSC numbers, do i maybe need a other one too ? |
|||
12-09-2018, 17:02 PM,
Post: #683
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
I have an issue, all FSC codes were uploaded perfectly as intended with no issues, but my maps are not working anymore after uploading all the required FSC.
I generated the FSC code for the maps again using intel123's FSC generator, and the maps worked for a short period of time. But then when the car went to sleep, the next time I turned the engine on, it's not working anymore (greyed out)! This how my FSC and certificates look like now, am I missing something?! The FSC id for the Australian Premium maps is 0030002E, it's shown below, but it says certificate non existent, is that how it's meant to be? Thanks in advance! |
|||
12-09-2018, 17:36 PM,
(This post was last modified: 12-09-2018, 17:41 PM by sebastianfernandes.)
Post: #684
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
there is no map certificate only fsc..
about the 9c fsc not getting loaded your fstool/carserver installation is not good. use dr gini instead. |
|||
12-09-2018, 18:59 PM,
Post: #685
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Link in first post is dead, can someone please reupload?
|
|||
12-09-2018, 19:27 PM,
(This post was last modified: 12-09-2018, 19:28 PM by Kri.)
Post: #686
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Thx for your answer sebastian
Unfortunateley Dr Gini does not work , thats why i switched to FStool Dr gini does connect normally to the car, reads all ecu`s and FSC list. but when i try to read/check/write an fsc i get that "method not found" error |
|||
12-09-2018, 19:51 PM,
Post: #687
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Did you copy all the related folders that come with Dr gini installation into the respected folders your hard drive.
For instance Folder ECU ETC ETC Just copy paste those. And try again. |
|||
12-09-2018, 19:57 PM,
(This post was last modified: 12-09-2018, 20:01 PM by dominpl.)
Post: #688
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
|
|||
12-09-2018, 20:33 PM,
Post: #689
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(12-09-2018, 17:36 PM)sebastianfernandes Wrote: there is no map certificate only fsc.. (12-09-2018, 19:51 PM)sebastianfernandes Wrote: Did you copy all the related folders that come with Dr gini installation into the respected folders your hard drive. Yes, i copied the ECU folder, thats the only one beside the installation i found that has to be copied / set up. |
|||
12-09-2018, 21:35 PM,
Post: #690
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
You don't got an icom I guess?
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
5 Guest(s)
5 Guest(s)
Return to TopReturn to Content