Possibly Related Threads…

16-03-2019, 08:05 AM,

Hi, i have a bmw x3 e83 year 2009 and when i try to flash the EGS module with Winkpft i get this error everytime, i have tried every mode( comfort/ expert) and every setting in configuration menu. The cable is a K + DCAN cable with switch. The shift is now in a strange mode, gear display is off, and many warning lights appear on the Kombi.
Any advice?

***oceandiver86*** · 16-03-2019, 08:30 AM,

Can you still communicate with ISTA or INPA or is the module unresponsive now?

16-03-2019, 08:42 AM,

(16-03-2019, 08:30 AM)oceandiver86 Wrote: Can you still communicate with ISTA or INPA or is the module unresponsive now?

With inpa i can' t communicate, with ista yes It shows programming status 12 and if i try to reprogram the module It fails with the same errore as the previous post.
With winkpft i can read the uif with assembly Number ecc. So it can communicate .

***bmwadriatic*** · (This post was last modified: 16-03-2019, 13:51 PM by Clusters.)

Hello i had same error few weeks ago while flashing DDE, see attachment. After that i found some settings on the internet, see link. I dont know if they are right so and okay for every ECU, but for me it worked after that.

Clusters · (This post was last modified: 16-03-2019, 13:51 PM by Clusters.)

(16-03-2019, 08:44 AM)bmwadriatic Wrote: Hello i had same error few weeks ago while flashing DDE, see attachment. After that i found some settings on the internet, see link. I dont know if they are right so and okay for every ECU, but for me it worked after that.

Which solution of the link works for you?

I have tried battery charger but it' s the same, tried those settings of winkfp as shown in picture, but it doesn' t work.
Solution 1 is coding with NCS Expert but i can' t find egs module in NCS Expert.
How can i code the module?

***hojo29*** · 16-03-2019, 10:23 AM,

I got it 2 times with a DCAN interface. But it took a long time for EGS to update.
The best way to get it back with an ICOM.

Clusters · (This post was last modified: 16-03-2019, 13:52 PM by Clusters.)

(16-03-2019, 10:23 AM)hojo29 Wrote: I got it 2 times with a DCAN interface. But it took a long time for EGS to update.
The best way to get it back with an ICOM.

Did you solve it with Dcan or ICOM?

***bmwadriatic*** · 16-03-2019, 10:44 AM,

Look in device Manager your Interface. Set it to com1 and also Look ms Time. Some times After Windows updating it goes back to Standard 16ms, than i Need to set up 1ms again every time

***hojo29*** · (This post was last modified: 16-03-2019, 13:53 PM by Clusters.)

(16-03-2019, 10:30 AM)stefa1991 Wrote:
(16-03-2019, 10:23 AM)hojo29 Wrote: I got it 2 times with a DCAN interface. But it took a long time for EGS to update.
The best way to get it back with an ICOM.

Did you solve it with Dcan or ICOM?

I solved it twice with DCAN.
And a few times with ICOM when DCAN has failed.

Clusters · (This post was last modified: 16-03-2019, 13:54 PM by Clusters.)

How did you solve it with DCAN? Different Settings?

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Flash CAS 3 for disable ELV	UnFan	4	290	10 hours ago Last Post: LogiHuś
	Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA	FSCmap	184	54,169	24-04-2024, 14:49 PM Last Post: Bag3ban1
	Flash MPPK software 20D B47 (Esys)	ruben_17non	5	633	10-04-2024, 21:38 PM Last Post: ruben_17non
	BMW G8x M3/M4 CSL EGS flash	weby	22	3,832	31-03-2024, 19:48 PM Last Post: Erezbmwm
	m2 g87 csl flash	Erezbmwm	0	161	31-03-2024, 18:46 PM Last Post: Erezbmwm
	CCC flash WINKFP ICOM	BimmerSLO	9	420	29-03-2024, 19:17 PM Last Post: Hoborg
	E84 X1 25d with 8hp45x how to flash Alp*na or other EGS	hasn38	0	132	23-03-2024, 00:26 AM Last Post: hasn38
	mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom	matiz	10	1,613	22-03-2024, 11:47 AM Last Post: urgi
	DKOMBI2 G12 FLASH DUMP	sebastianfernandes	2	287	03-03-2024, 06:46 AM Last Post: sebastianfernandes
	E114A3 Error SeatBelt Acsm Issue after flash	Billyjoe69	2	331	20-02-2024, 17:09 PM Last Post: cedchung

Contact Us