Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA-D and ISTA-P not Working!
17-10-2019, 20:08 PM,
Post: #1
|
|||
|
|||
ISTA-D and ISTA-P not Working!
Hello community,
I have installed ISTA-D and ISTA-P on my computer, but when I try connect to my car with K+DKAN cable nothing happens. I have on my computer NCS Expert and INPA and these tools is working very well (NCS Expert, INPA and WinKFP). I use the same EDIABAS to use these tools, I've checked on youtube and suposly these two different tools is compatible without problems, and I followed the installation instructions carefully. I'm using COM1 port (I already tryed with COM9 but unsuccessfully). Someone with the same problem? ISTA-D ERROR: ISTA-P ERRORS: |
|||
17-10-2019, 20:40 PM,
Post: #2
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
Can you post picture from ista+ settings -- interface
|
|||
17-10-2019, 21:11 PM,
Post: #3
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
what is the car??
|
|||
17-10-2019, 21:29 PM,
(This post was last modified: 17-10-2019, 21:30 PM by JoaoVaranda.)
Post: #4
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
|
|||
17-10-2019, 21:55 PM,
(This post was last modified: 17-10-2019, 21:56 PM by user0086.)
Post: #5
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
To which port did you connect the cable? OBD2 or the 20-pin round BMW connector? Can you access all modules with INPA / NCS Expert?
|
|||
17-10-2019, 21:57 PM,
(This post was last modified: 17-10-2019, 22:01 PM by JoaoVaranda.)
Post: #6
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
|
|||
18-10-2019, 04:07 AM,
Post: #7
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
Try Workaround:
1. open Session in ISTA with your VIN 2. if all Ok, connect to Car 3. make complete identification |
|||
18-10-2019, 19:49 PM,
Post: #8
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
|
|||
19-10-2019, 13:32 PM,
Post: #9
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
(18-10-2019, 19:49 PM)JoaoVaranda Wrote:(18-10-2019, 04:07 AM)Sedoy Wrote: Try Workaround: Which model year is the car? If it's before 2001 it has the round connector under the hood and it should be used per BMW official instructions. If a BMW has the round connector under the hood, it's the only one that is connector to all modules. Which Ediabas is installed? |
|||
19-10-2019, 14:05 PM,
Post: #10
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
(19-10-2019, 13:32 PM)Spirit5676 Wrote: Which model year is the car? If it's before 2001 it has the round connector under the hood and it should be used per BMW official instructions. If a BMW has the round connector under the hood, it's the only one that is connector to all modules. Is BMW E46 320D 150HP from 2002. Him has OBD2 connector. My EDIABAS version is: 7.3.0 My ISTA-D version is: 4.19.40 My ISTA-P version is: 3.66.0.200 |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ISTA Standalone Licenserequest up to v4.37.4x | Sedoy | 8,751 | 692,962 |
9 minutes ago Last Post: Sedoy |
|
Requesting ISTA-P VO.xmldb for this VIN: WMWZB3C57CWM30715 | BMWF01 | 1 | 47 |
2 hours ago Last Post: ____ANGEL___ |
|
ISTA 4.46.xx problems and possible solution | Sedoy | 113 | 14,559 |
10 hours ago Last Post: NeRkO20 |
|
ISTA+ 4.47.3x Install Files - MEGA | shawnsheridan | 2 | 509 |
Yesterday, 23:03 PM Last Post: ctgy8923 |
|
Ultimate Ediabas/ISTA+ voltage control V3 | Node | 323 | 125,116 |
21-05-2024, 10:44 AM Last Post: vld |
|
Dutch language package ista 4.45 | db8000 | 0 | 54 |
19-05-2024, 05:01 AM Last Post: db8000 |
|
HELP NEEDED TU UPDATE ISTA D 4.41.50 TO 4.42.12 | ipcsr76 | 1 | 412 |
18-05-2024, 08:53 AM Last Post: piteerus |
|
ista 4.46 Standalone | kiranabc | 112 | 15,887 |
16-05-2024, 12:20 PM Last Post: flterence |
|
ISTA 4.39.20 Testing On Windows11 24H2 | 2013m5 | 0 | 163 |
15-05-2024, 08:44 AM Last Post: 2013m5 |
|
EDC17CP09 Working hours reset | MBENZTECH | 1 | 108 |
14-05-2024, 06:44 AM Last Post: foxportal |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content