Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E39 DDE 4.0 Programming with WinKFP?
09-02-2016, 15:34 PM,
Post: #11
|
|||
|
|||
RE: BMW E39 DDE 4.0 Programming with WinKFP?
(09-02-2016, 07:46 AM)Kamcio Wrote:(09-02-2016, 03:00 AM)CATAHA Wrote: Adjust com-port timing and make sure you run obd.exe and configure correctly edibas.ini (timing and port)\ To resolve connecting problems with ECU modules in old cars you can increase response time on receive and connecting commands in Ediabas.ini. This affects all cables ICOM, K-Line adapter, K-Dcan etc....... Original TimeoutConnect = 2000 TimeoutReceive = 2000 TimeoutFunction = 10000 Change to TimeoutConnect = 20000 TimeoutReceive = 20000 TimeoutFunction = 59000 If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
09-05-2022, 08:04 AM,
Post: #12
|
|||
|
|||
RE: BMW E39 DDE 4.0 Programming with WinKFP?
Hello
Reviving an old thread. Trying to flash DDE 4.0 ECU with Winkfp and KDCAN(Bimmergeeks) adapter. Diagnostics everything is working well but only the flash does not succeed. Getting an IFH-0010 error. Tried also changing the ediabas.ini settings but still no luck. With Icom I could restore the ECU to working state. But would like to use also the DCAN adapter to update the DDE 4.0 ecu. On newer ecus like DDE 5.0 no problem using the KDCAN adapter. |
|||
09-05-2022, 11:50 AM,
Post: #13
|
|||
|
|||
RE: BMW E39 DDE 4.0 Programming with WinKFP?
I can also confirm that there is a problem with updating DDE4 using DCAN, but if you set latency in device manager to 16ms, everything will be okay. All other drivers must be 1ms, strange but for me it works always
I have to try CATAHA soultion also |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ISTA 4.33.30 The programming system could not be initialised | Edward1968 | 40 | 8,746 |
01-06-2024, 09:50 AM Last Post: iyade46 |
|
ISTA 4.47 programming N/A | Neon10 | 7 | 580 |
28-05-2024, 07:46 AM Last Post: Thomas77 |
|
Winkfp cannot read uif | MPTeam | 7 | 274 |
27-04-2024, 19:07 PM Last Post: MPTeam |
|
CCC flash WINKFP ICOM | BimmerSLO | 9 | 465 |
29-03-2024, 19:17 PM Last Post: Hoborg |
|
WinKFP can't find ZUSB 6957356 | andre426hemi | 4 | 349 |
25-03-2024, 00:40 AM Last Post: armenh7 |
|
Solved ✔ ISTA Standalone WLAN programming | botho | 4 | 439 |
21-03-2024, 11:13 AM Last Post: botho |
|
F15 Programming Error | mcrussell | 7 | 545 |
20-03-2024, 05:38 AM Last Post: SweetBMW |
|
BMW X6 E71 Programming | Ryzen | 5 | 339 |
16-03-2024, 12:42 PM Last Post: Node |
|
problem with flashing CHAMP2 module (the programming dependencies are not correct) | azwgh | 17 | 1,050 |
11-02-2024, 19:39 PM Last Post: azwgh |
|
Solved ✔ FIXED! winkfp flash DME fail? | bushido1992 | 4 | 405 |
28-01-2024, 17:51 PM Last Post: bushido1992 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content