Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
INPA and E31 No Communication
09-09-2022, 21:35 PM,
Post: #1
|
|||
|
|||
INPA and E31 No Communication
Attempted using autologic scanner and had no luck connecting to DME. Verified power/data at port. Attempted to connect via K+DCan cable with adaptor to round port under hood and had no luck communicating with the DME. Any tips/tricks?
|
|||
09-09-2022, 21:48 PM,
Post: #2
|
|||
|
|||
RE: INPA and E31 No Communication
Use ICOM, it will work
|
|||
09-09-2022, 21:49 PM,
Post: #3
|
|||
|
|||
RE: INPA and E31 No Communication
For E31 you will need REAL hardware with both K&L lines. KDCan is too puny to support old ways
P.S. REAL = ICOM, ADS & some others |
|||
09-09-2022, 22:35 PM,
Post: #4
|
|||
|
|||
RE: INPA and E31 No Communication
You probably need an ADS interface with a proper RS232 port on your laptop. Then it's INPA or DIS (which is a bit dreadful).
....or an icom and ISTA: that's the easy way |
|||
09-09-2022, 22:38 PM,
Post: #5
|
|||
|
|||
RE: INPA and E31 No Communication
(09-09-2022, 22:35 PM)Martini Wrote: You probably need an ADS interface with a proper RS232 port on your laptop. Then it's INPA or DIS (which is a bit dreadful). There is NO reason you can't use ICOM with INPA on E31. But yes, for ADS your need REAL com port (as in REAL hardware). |
|||
09-09-2022, 22:45 PM,
Post: #6
|
|||
|
|||
RE: INPA and E31 No Communication
I didn't say you can't use an ICOM. In fact, I said that was the easy way.
But since he mentioned using a cable in his opening post, I thought it was worth it to elaborate on the ADS interface and the need for an RS232 port and the hassle of installing/using DIS |
|||
10-09-2022, 00:09 AM,
Post: #7
|
|||
|
|||
RE: INPA and E31 No Communication
The iCom is working fine with 20 pin adapter on my 95 e36 325i either INPA or ISTA.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content