Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bench reading ISN CAS 3 BMW explorer?
10-03-2023, 15:43 PM,
Post: #1
|
|||
|
|||
Bench reading ISN CAS 3 BMW explorer?
Hey guys, so I connected the bmw explorer with my bench cable. Can High/Low, Ground, 12V.
Now I want to read the isn, therefore it has to be update with bmw explorer. Problem is: Which pin is ignition detect/kl15? Bmw explorer says I have to turn off the ignition, how can I do this but simultaneously give the cas 12V ? Without ignition 12V. I have a godiag cable, so I can simulate ignition, but I don't know which pin. I have Pinout |
|||
10-03-2023, 15:47 PM,
Post: #2
|
|||
|
|||
RE: Bench reading ISN CAS 3 BMW explorer?
15WUP is PIN19 if thats what u mean
|
|||
10-03-2023, 15:47 PM,
Post: #3
|
|||
|
|||
RE: Bench reading ISN CAS 3 BMW explorer?
Get a ignition switch with key slot.. and plug to cas
|
|||
16-03-2023, 19:28 PM,
(This post was last modified: 16-03-2023, 19:49 PM by xMoses.)
Post: #4
|
|||
|
|||
RE: Bench reading ISN CAS 3 BMW explorer?
(10-03-2023, 15:47 PM)jaramillo Wrote: Get a ignition switch with key slot.. and plug to cas Just connected one, but which pin do I have to supply 12v to get the key soaked in? For now I have 12 ground 35 can low 26 can high 34 12v Ignition coil 1->1 2->2 And so on, also tried 12v on pin 1 but key won't get soaked in |
|||
17-03-2023, 06:54 AM,
Post: #5
|
|||
|
|||
RE: Bench reading ISN CAS 3 BMW explorer?
BMW explorer always displays the warning that ignition must be switched off. If you have a bench setup, why not just see if it works with an old / unused CAS? These are very cheap.
|
|||
17-03-2023, 07:27 AM,
Post: #6
|
|||
|
|||
RE: Bench reading ISN CAS 3 BMW explorer?
(17-03-2023, 06:54 AM)user0086 Wrote: BMW explorer always displays the warning that ignition must be switched off. If you have a bench setup, why not just see if it works with an old / unused CAS? These are very cheap. The case I've got is am old one that I can use, but if I press update it tells update fail turn off the car for 4 minutes etc. No matter what I do |
|||
17-03-2023, 12:16 PM,
Post: #7
|
|||
|
|||
RE: Bench reading ISN CAS 3 BMW explorer?
I have tried connecting explorer to cas according to diagram but it never worked!! So I made a small bench setup with JBBF and that works. Invest in that and be happy
|
|||
18-03-2023, 17:07 PM,
Post: #8
|
|||
|
|||
RE: Bench reading ISN CAS 3 BMW explorer?
(17-03-2023, 12:16 PM)willisodhiambo Wrote: I have tried connecting explorer to cas according to diagram but it never worked!! So I made a small bench setup with JBBF and that works. Invest in that and be happy I've got it working and it shows me the cas and I can code etc. But I can't program it with bmw explorer Something is missing for the cas |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Tool for reading R56 LCI 2013 Cooper D Dde | Carl-C | 1 | 53 |
4 minutes ago Last Post: ____ANGEL___ |
|
i need software for EF Scanner 2018.12 (for clone BMW Explorer) | roanoke | 1 | 98 |
14-06-2024, 17:39 PM Last Post: user0086 |
|
CAS4 BENCH SETUP | brahem | 2 | 146 |
11-06-2024, 07:12 AM Last Post: brahem |
|
[Solved] G30 EVO on bench with FEM | World L | 3 | 197 |
04-06-2024, 16:13 PM Last Post: World L |
|
Tool for bench read 8hp | Garryq | 10 | 2,042 |
03-06-2024, 20:05 PM Last Post: Vladica |
|
Autohex or bmw explorer? | dominpl | 5 | 490 |
01-06-2024, 04:33 AM Last Post: that4chanhacker |
|
ID8 with BCP on bench, can't turn on ignition | Matthew53 | 1 | 223 |
23-05-2024, 21:39 PM Last Post: Matthew53 |
|
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 867 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
MGU Bench connection | kimz | 4 | 611 |
22-04-2024, 17:06 PM Last Post: kimz |
|
Test bench Connection to CAN ECU's | HaakonA | 3 | 350 |
03-04-2024, 07:24 AM Last Post: sixcode |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content