Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT EVO and NBT regular - CID cable differences
20-12-2017, 15:26 PM,
Post: #11
|
|||
|
|||
RE: NBT EVO and NBT regular - CID cable differences
Thank you I will measure it soon.
|
|||
20-12-2017, 19:37 PM,
Post: #12
|
|||
|
|||
RE: NBT EVO and NBT regular - CID cable differences
I have exactly 8.2V, is it still too low? How do you guys think?
|
|||
20-12-2017, 20:00 PM,
Post: #13
|
|||
|
|||
RE: NBT EVO and NBT regular - CID cable differences
|
|||
20-12-2017, 21:20 PM,
Post: #14
|
|||
|
|||
RE: NBT EVO and NBT regular - CID cable differences
Control if all parameter display is setting right
in particolar resolution setting CID_APIX_MODE Current: apix1=01 CID_COLOR_DEPTH Current: 18=01 CID_DISPLAY_RES Current: 1280_480=02 CID_DISPLAY_SIZE Current: 10_25=04 |
|||
20-12-2017, 21:29 PM,
Post: #15
|
|||
|
|||
RE: NBT EVO and NBT regular - CID cable differences
I don't know how to calibrate it. I bought converter from customretrofit, I need to ask them whether it's possible to modify somehow.
All above codes are made and it still flickering. On original NBT EVO screen from F30 it works ok when coded to apix2. |
|||
20-12-2017, 21:33 PM,
Post: #16
|
|||
|
|||
RE: NBT EVO and NBT regular - CID cable differences
(20-12-2017, 21:29 PM)pweber84 Wrote: I don't know how to calibrate it. I bought converter from customretrofit, I need to ask them whether it's possible to modify somehow. They use a 0.5 euro voltage regulator from China. Use a blade, remove the black tubing. Make sure you don't cut through the board or components. You will see a small gold screw that might be glued. Remove the glue, then adjust the screw by turning it to the right (When the screw is on the top of the board). Use your volt meter to make sure you are having 8.4v now. Might take a good few tries. If the problem persists regulator might be faulty. |
|||
20-12-2017, 22:07 PM,
Post: #17
|
|||
|
|||
RE: NBT EVO and NBT regular - CID cable differences
Customretrofit just wrote me that 8.2V is correct voltage.
But I will try as you say, I will remove the tubing and turn the screw to the right and then measure it again. Perhaps it's faulty. Thank you very much for your support. Is it possible that CID display is faulty or not flashed to the newest version? |
|||
21-12-2017, 09:33 AM,
Post: #18
|
|||
|
|||
RE: NBT EVO and NBT regular - CID cable differences
I do not think that only 0.2V make a difference! the cid is not codable, if the resolution I wrote you is correctly set to 1280x480 at this point I think the cid is faulty
|
|||
22-12-2017, 08:21 AM,
Post: #19
|
|||
|
|||
RE: NBT EVO and NBT regular - CID cable differences
Smercki you right, CID is faulty. I returned it to the seller.
Need to orther another one. Thank you all! |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content