Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT ssh access
12-05-2022, 17:31 PM,
Post: #21
|
|||
|
|||
RE: NBT ssh access
if you have telnet connection, than possible with "cp" command, but need to be local there
usb is not active when hdd/dvdrom error |
|||
12-05-2022, 20:47 PM,
Post: #22
|
|||
|
|||
RE: NBT ssh access
(12-05-2022, 17:31 PM)jararak Wrote: if you have telnet connection, than possible with "cp" command, but need to be local there Ok, I got it. I wouldn't need that if I could have an access by usb. I have fully working NBT. It accepts ssh patch by usb (automatically restart after about a minute), but ssh is still closed. Is this really so difficult to open ssh by USB? Maybe it requires some additional steps to do Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
12-05-2022, 20:58 PM,
Post: #23
|
|||
|
|||
RE: NBT ssh access
(12-05-2022, 20:47 PM)Matthew53 Wrote:(12-05-2022, 17:31 PM)jararak Wrote: if you have telnet connection, than possible with "cp" command, but need to be local there Which patch did you use? |
|||
13-05-2022, 14:52 PM,
Post: #24
|
|||
|
|||
RE: NBT ssh access
(12-05-2022, 20:58 PM)claw Wrote:(12-05-2022, 20:47 PM)Matthew53 Wrote:(12-05-2022, 17:31 PM)jararak Wrote: if you have telnet connection, than possible with "cp" command, but need to be local there The one generated from Engineering Tool Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
13-05-2022, 21:55 PM,
Post: #25
|
|||
|
|||
RE: NBT ssh access
(13-05-2022, 14:52 PM)Matthew53 Wrote:That one should work fine on port 22.(12-05-2022, 20:58 PM)claw Wrote:(12-05-2022, 20:47 PM)Matthew53 Wrote:(12-05-2022, 17:31 PM)jararak Wrote: if you have telnet connection, than possible with "cp" command, but need to be local there It's just that, no other steps are needed. Run a port scanner, see if other doors are open and running ssh. just in case |
|||
14-05-2022, 11:44 AM,
Post: #26
|
|||
|
|||
RE: NBT ssh access
(13-05-2022, 21:55 PM)claw Wrote:So probably something wrong with HU. I scanned ports and 22 is always closed. I'll try on another NBT(13-05-2022, 14:52 PM)Matthew53 Wrote:That one should work fine on port 22.(12-05-2022, 20:58 PM)claw Wrote:(12-05-2022, 20:47 PM)Matthew53 Wrote:(12-05-2022, 17:31 PM)jararak Wrote: if you have telnet connection, than possible with "cp" command, but need to be local there Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
05-01-2023, 23:06 PM,
Post: #27
|
|||
|
|||
RE: NBT ssh access
For anyone that lands here through search, and connected via serial to NBT (not evo):
1. #> sysetshell 2. syset:> connect 3. syset:> login Diagnose 4. syset:> setk SYS_DEBUG=0x01 5. syset:> store Reboot. |
|||
07-01-2023, 20:31 PM,
(This post was last modified: 07-01-2023, 20:31 PM by RomeyRome.)
Post: #28
|
|||
|
|||
RE: NBT ssh access
For evo it's:
1. #> sysetshellevo 2. syset:> setk SYS_DEBUG=true 3. syset:> store |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content