[smilo]

Hi to all,

Can someone tell me if there is a solution to generate a CAFD for an ECU considering a specific FA - without coding ?
When we detect the CAF for a SWE in Esys, we have to code it to the ECU, then read coding data to be able to check the CAFD data. Is there a way or a tool that allow seeing the CAFD without coding then reading data from the ECU ?

[maxwell4321]

Of course, Tokenmaster NCD/CAFD tool and you can also use esys offline after you have read your Cafds

[larshutten]

You can create .ncd with coding verification in esys

[smilo]

Thanks guys -

Of course, Tokenmaster NCD/CAFD tool and you can also use esys offline after you have read your Cafds

yes of course I use very often NcdCafdTool, but how to generate a CAFD according to a target couple SWE/FA ?

You can create .ncd with coding verification in esys

I use this module (Coding-Verification) to check compatibility of CAFDs for a target ECU with its i-Level, but I don't how to generate a CAFD for a specific FA/SWE -

[Almaretto]

yes of course I use very often NcdCafdTool, but how to generate a CAFD according to a target couple SWE/FA ?

You can use TAL-Calculation &/or E-sys Coding-Verification.

For Calculation:

• Connect via gateway: http://127.0.0.1:6801 (ignore error)
  
• Load saved FA & SVT
  
• Calculate KIS/SVT Target

For Coding Verification

• Load & Activate FA
  
• Either Load SVT or use Verification by KIS and select desired options
  
• Under settings: select SVT-Trace if you want SVT and NCD-Trace for CAFD's

[smilo]

yes of course I use very often NcdCafdTool, but how to generate a CAFD according to a target couple SWE/FA ?

You can use TAL-Calculation &/or E-sys Coding-Verification.

For Calculation:

• Connect via gateway: http://127.0.0.1:6801 (ignore error)
  
• Load saved FA & SVT
  
• Calculate KIS/SVT Target

For Coding Verification

• Load & Activate FA
  
• Either Load SVT or use Verification by KIS and select desired options
  
• Under settings: select SVT-Trace if you want SVT and NCD-Trace for CAFD's

Thanks ! it worked with Coding-Verification
I had to select a trace directory, otherwise generate NCD option is grayed