Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
cas / cluster bench setup
28-11-2018, 06:44 AM,
(This post was last modified: 28-11-2018, 07:26 AM by Cniksor.)
Post: #41
|
|||
|
|||
RE: cas / cluster bench setup
first thank you to wxwwxw who was a major help in his first diagram which i based my setup on, but i was never able to get the cas to connect and now i have!
also big thanks to IMPAC helping me on the build and eventually also pointed me to change a few wires that fixed the issue which were: cas pin 26 to blue plug jbbfe2 pin 10 cas pin 35 to blue plug jbbfe2 pin 36 obd2 pin 1 to cas pin 8 for wake up. i am now successfully able to connect to KOMBI and CAS with INPA, NCSEXPERT, CGDI, MULTI TOOL, at least those are all i tested on so far. key error shows up if incorrect key is in slot, and now i can start the cluster after pressing START with correct programed key. exactly what i wanted to do with this. here a quick video. 1 here is updated diagram: PARTS: KOMBI (CLUSTER) KEY HOLDER and PUSH TO START button. ELV (im using a emulator, only needed for ELV CAS, figure better to have it on the system, havn't tried without it) OBD2 port (im using a oem one from a e90, which has the resistor on the hi and low lines) JBBFE2 (make sure its the 2 NOT the jbbe which didn't work, i got the JBBFE2 from a 2008 e90) CAS 2/3 MODULE a power source, im using Lavolta bps-305 dc power supply. i made everything easier for me by using OEM plugs to connect to everything easier and faster between parts.hopefully my month long journey on building this can help anyone else, i appreciate everyone who has helped. my next update will be to try to connect a MASK/CCC to this, if anyone can help with with that, please post and ill post more updates to this. |
|||
Reputation: +5 - dil6222 [+1] , thecash [+1] , Cowboy [+1] , Gmmdi911 [+1] , Tech206 [+1] | |||
28-11-2018, 08:23 AM,
Post: #42
|
|||
|
|||
RE: cas / cluster bench setup
Do you have the part number for the JBBFE2 that does not need the elv please?
|
|||
28-11-2018, 08:23 AM,
Post: #43
|
|||
|
|||
RE: cas / cluster bench setup
(28-11-2018, 06:44 AM)Cniksor Wrote: first thank you to wxwwxw who was a major help in his first diagram which i based my setup on, but i was never able to get the cas to connect and now i have! Can you tell me, which ELV emulator you have ? Thx |
|||
28-11-2018, 09:09 AM,
Post: #44
|
|||
|
|||
RE: cas / cluster bench setup
ELV emulator https://www.lacartech.com/products/elv-bmw-emulator
jbbfe2 part number im using: 61359192740 |
|||
Reputation: +1 - dil6222 [+1] | |||
28-11-2018, 09:43 AM,
Post: #45
|
|||
|
|||
RE: cas / cluster bench setup
Nice work cniksor glad you got it solved I've watched this thread just out of interest
And to all others that helped him big thanks If mine or others posts and info are helpful please give thanks/rep
|
|||
29-11-2018, 05:46 AM,
Post: #46
|
|||
|
|||
RE: cas / cluster bench setup
(28-11-2018, 09:09 AM)Cniksor Wrote: ELV emulator https://www.lacartech.com/products/elv-bmw-emulator I think my problem is the JBBF. I am using a 2010 JBBF. Guess I have to look for an older one. |
|||
29-11-2018, 09:46 AM,
Post: #47
|
|||
|
|||
RE: cas / cluster bench setup
(28-11-2018, 08:23 AM)ccfj1 Wrote: Do you have the part number for the JBBFE2 that does not need the elv please? On previous page Cniksor wrote: CAS3 9147227 no ELV CAS3 9147226 with ELV From this and his excellent diagram it appears that ELV is not JBBF2 but CAS dependent. It looks like cost effective set up will be: - Start button - Key holder - CAS 9147227 + assigned key <- no need for ELV or ELV emulator - JBBF2 61359192740 (confirmed for working according to diagram) - OBD port - KOMBI (could be any) Cniksor, Can you please share resistance values on CAN Hi and CAN Low lines in E90 port ? |
|||
29-11-2018, 16:37 PM,
(This post was last modified: 29-11-2018, 16:44 PM by willisodhiambo.)
Post: #48
|
|||
|
|||
RE: cas / cluster bench setup
Will this work or this is JBBFE? I saw one marked JBBFE II
|
|||
30-11-2018, 06:21 AM,
Post: #49
|
|||
|
|||
RE: cas / cluster bench setup
(29-11-2018, 09:46 AM)Santa Cruz Wrote:(28-11-2018, 08:23 AM)ccfj1 Wrote: Do you have the part number for the JBBFE2 that does not need the elv please? 120 ohm |
|||
30-11-2018, 20:45 PM,
Post: #50
|
|||
|
|||
RE: cas / cluster bench setup
Hello! I am in the process of connecting modules on the table and I noticed that my CAS and JBBFE II modules do not have a PIN 40 output. I do not know what to do. Can I add these pins myself? Thanks in advance for tips and greet
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ESys Launcher PRO Setup 2.8.1 | fengyonghua21 | 414 | 51,591 |
15-05-2024, 18:24 PM Last Post: Pommie |
|
E85 cluster eeprom VIN location | stydly | 3 | 154 |
08-05-2024, 19:47 PM Last Post: gabur431 |
|
mini f60 countryman, mileage issues red dot after cluster replacement | deutsch | 6 | 218 |
08-05-2024, 11:15 AM Last Post: EngineerX |
|
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 791 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,147 |
27-04-2024, 06:51 AM Last Post: hamzettin |
|
Instrument cluster e46 | mapkrk | 2 | 212 |
27-04-2024, 00:33 AM Last Post: mapkrk |
|
Bmw f10 6wa cluster mileage jumping 160D0WT | Bavrian | 4 | 188 |
24-04-2024, 09:32 AM Last Post: Bavrian |
|
6wb cluster swap and coding | xMoses | 4 | 281 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
MGU Bench connection | kimz | 4 | 570 |
22-04-2024, 17:06 PM Last Post: kimz |
|
Test bench Connection to CAN ECU's | HaakonA | 3 | 330 |
03-04-2024, 07:24 AM Last Post: sixcode |
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content