Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA/D/P Fault 94025 and Vehicle not identical to series
30-12-2018, 16:16 PM,
Post: #1
|
|||
|
|||
ISTA/D/P Fault 94025 and Vehicle not identical to series
Hello
I upgraded my own E91 FRMFA module to the FRM3 module. I coded this module with NCSexpert by inserting the FA into the NFRM module from CAS and encoding the module with the Default profile. Everything is working as it should, no faults in modules when looking with INPA. But yesterday I looked with ISTA-P car and encountered a problem in ISTA-P 94025 Determination of the Control Modules in the vehicle failed. The question of what to do to overcome this error? ISTA-P does not allow anything to be done, ISTA-D only warns. The car itself is 02/2006 E91. FRM3 was from the 2012 E91 LCI Before that there was not anything concerned about that car with ISTA. Why the ISTA/D flags the car to uncompatible or anything like that? |
|||
31-12-2018, 13:23 PM,
Post: #2
|
|||
|
|||
RE: ISTA/D/P Fault 94025 and Vehicle not identical to series
(30-12-2018, 16:16 PM)Siller Wrote: Hello Have you flashed the module with winkfp or you just coded with ncs expert? |
|||
31-12-2018, 15:04 PM,
Post: #3
|
|||
|
|||
RE: ISTA/D/P Fault 94025 and Vehicle not identical to series
Most likely you didn't adjust I-level data in used FRM3.
|
|||
01-01-2019, 15:19 PM,
Post: #4
|
|||
|
|||
RE: ISTA/D/P Fault 94025 and Vehicle not identical to series
|
|||
01-01-2019, 16:04 PM,
Post: #5
|
|||
|
|||
RE: ISTA/D/P Fault 94025 and Vehicle not identical to series
same as FA also I-level data (factory- backup - current) is written to the FRM.
As you replaced it, it will not match the car. You can write/adjust it with Tool32. |
|||
01-01-2019, 21:01 PM,
Post: #6
|
|||
|
|||
RE: ISTA/D/P Fault 94025 and Vehicle not identical to series
(01-01-2019, 16:04 PM)oceandiver86 Wrote: same as FA also I-level data (factory- backup - current) is written to the FRM. I-level data? never heard of it, maybe can you explaine the steps how to do it. its not the same with flashing (winfp)? |
|||
01-01-2019, 21:20 PM,
Post: #7
|
|||
|
|||
RE: ISTA/D/P Fault 94025 and Vehicle not identical to series
I-level like "Zeitkriterien" it means what kind of production it corresponds to.
you use an FRM witch com first in middle of 2008 (ex.) but you will use in a car from 2006 |
|||
01-01-2019, 21:28 PM,
Post: #8
|
|||
|
|||
RE: ISTA/D/P Fault 94025 and Vehicle not identical to series
(01-01-2019, 21:20 PM)Vojno Wrote: I-level like "Zeitkriterien" it means what kind of production it corresponds to. great info. if its not too much to ask can you write few steps on how to do it with tool32. THANK YOU |
|||
01-01-2019, 21:45 PM,
(This post was last modified: 01-01-2019, 21:47 PM by Vojno.)
Post: #9
|
|||
|
|||
RE: ISTA/D/P Fault 94025 and Vehicle not identical to series
I have no seem now, but....:
1, read with tool32 like FRM3.prg 2, I don't remember, maybe the last one is the "write I-level", 3, add the tree data: ex.: E089-06-07-500; 0; 0 where the E089-06-07-500 is the factory I-level, leave the second and third "0" if you don't no (factory; backup; actual) That's about it! |
|||
01-01-2019, 22:46 PM,
Post: #10
|
|||
|
|||
RE: ISTA/D/P Fault 94025 and Vehicle not identical to series
(01-01-2019, 21:45 PM)Vojno Wrote: I have no seem now, but....: 1000 X THANKS |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Ultimate Ediabas/ISTA+ voltage control V3 | Node | 323 | 124,978 |
6 hours ago Last Post: vld |
|
ISTA Standalone Licenserequest up to v4.37.4x | Sedoy | 8,748 | 691,687 |
Yesterday, 14:32 PM Last Post: Sedoy |
|
Dutch language package ista 4.45 | db8000 | 0 | 38 |
19-05-2024, 05:01 AM Last Post: db8000 |
|
HELP NEEDED TU UPDATE ISTA D 4.41.50 TO 4.42.12 | ipcsr76 | 1 | 406 |
18-05-2024, 08:53 AM Last Post: piteerus |
|
ISTA 4.46.xx problems and possible solution | Sedoy | 103 | 13,991 |
18-05-2024, 07:50 AM Last Post: Sedoy |
|
Bmw x1 f48 disabled fault | kuki88 | 7 | 277 |
17-05-2024, 08:00 AM Last Post: kuki88 |
|
ista 4.46 Standalone | kiranabc | 112 | 15,759 |
16-05-2024, 12:20 PM Last Post: flterence |
|
ISTA 4.39.20 Testing On Windows11 24H2 | 2013m5 | 0 | 157 |
15-05-2024, 08:44 AM Last Post: 2013m5 |
|
How to code hands free driver assistant (G-series) | btvaleks | 21 | 5,628 |
14-05-2024, 07:27 AM Last Post: btvaleks |
|
ISTA SQLiteDBs PL Polish 4.40.12 - 4.40.40 | maksymw | 4 | 1,078 |
12-05-2024, 09:52 AM Last Post: PstraG |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content