Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Required coding after nbt evo2 retrofit
15-05-2022, 14:48 PM,
Post: #21
|
|||
|
|||
RE: Required coding after nbt evo2 retrofit
(15-05-2022, 14:29 PM)alsamaraee Wrote:(15-05-2022, 14:15 PM)user_530d Wrote: Have you coded hu with F10 and build date >7/13 and open up all Flexray ports with TOOL32 than you can see ICM. Also can help to reset/restart ZGW with ISTA. Nope, need to use Tool32 to open ports. Open Tool32 and open the zgw.prg Search for job named "status_flexray_pfad" With that job you can check which pfads are active on the flexray. After that you need to manually open them with steuern_flexray_pfad The right command to open ports are 0x01;0x01, where the first 01 indicates port number, so for port 2 would be - 0x02;0x01 and etc. For fastest contact with me WhatsApp/Viber/Telegram - +359895653175
Carplay Activations (EVO ID5/6/Entrynav/MGU) - ID4 to ID5/6 Flash All map FSC Codes - Retrofit FSC Packs xHP Dealer - Remote coding for all series Thanks + Rep appreciated! |
|||
15-05-2022, 14:50 PM,
Post: #22
|
|||
|
|||
RE: Required coding after nbt evo2 retrofit
Normally with right vo in ZGW (VCM), ZGW Open up the right FlexRay ports byselve. Also FlexRay init/learn do this. I have used tool32 for this.
With tool32 you can check the open ports and open all of them for testing. Then you see whether the ICM answers. I have guide in attachment but sorry only German. |