[bmw93260]

Hi guys, i have an ip issue with a new oem icom
indeed the i-next is not reconized by itool radar. no IP ect..
event with ista D 4.32.15.

i think i have to upgrade the firmware , but when i try ti connect it with microsoft edge :

http://169.254.33.45:60080/


username/password: root/NZY1150263

i have nothing...but i can connect it as a k-dcan cable with Drgini21

p.s: using win11
thank you for your help

[Fx82]

Check that no static ip is set in Windows.
Connect icom and perform reset. It will get 169 address again.
Also connect icom directly to laptop. Once it works you can attach router if needed.

[Node]

You need to add your ICOM address to config file of iToolRadar or else it never will find it. That is POC tool. I don't use anymore and could never been happier.

[nonymou]

maybe try to factory reset

[dansm]

If ICOM is not set to the IP address static addresses then connect ICOM to the DHCP router or DHCP software and find out what IP address it has received.
Then you log in to the administration.