Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW F20 EPS no see in esys
29-10-2023, 15:07 PM,
Post: #11
|
|||
|
|||
RE: BMW F20 EPS no see in esys
(29-10-2023, 14:34 PM)Vadim AA Wrote:(29-10-2023, 14:17 PM)bellphegorus Wrote: there is no magic, you have no communication with EPS. You need to verify the Wires.. with OSCI, or why should it not be in SVT? I think the Topicstarter knows how to change a FEM. But do not know how to properly verify the wires |
|||
29-10-2023, 15:09 PM,
Post: #12
|
|||
|
|||
RE: BMW F20 EPS no see in esys
(29-10-2023, 15:07 PM)bellphegorus Wrote:According to the first message, it looks very similar.(29-10-2023, 14:34 PM)Vadim AA Wrote:(29-10-2023, 14:17 PM)bellphegorus Wrote: there is no magic, you have no communication with EPS. You need to verify the Wires.. with OSCI, or |
|||
29-10-2023, 16:15 PM,
Post: #13
|
|||
|
|||
RE: BMW F20 EPS no see in esys
I also have such a case of BMW G12 740i,
with DSC, the car sees DSC and does not report a fault, but it is not visible to the ISTA, ESYS, INPA, etc. software I have already had such cases (DME/DDE, DSC, etc.), usually it is enough to program the GW gate with the latest psdzdata and flexray modules are back or open the channels in tool32 and reprogram the GW gateway but now it doesn't help... and everything is OK for the car If my post helped you hit the thanks and reputation button!
|
|||
29-10-2023, 18:00 PM,
Post: #14
|
|||
|
|||
RE: BMW F20 EPS no see in esys
|
|||
29-10-2023, 18:20 PM,
Post: #15
|
|||
|
|||
RE: BMW F20 EPS no see in esys
If you read vcm can you see eps?
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
29-10-2023, 18:27 PM,
Post: #16
|
|||
|
|||
RE: BMW F20 EPS no see in esys
|
|||
29-10-2023, 18:29 PM,
Post: #17
|
|||
|
|||
RE: BMW F20 EPS no see in esys
You can try generate svt_soll and write it then open port with tool32 and reset
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
29-10-2023, 19:50 PM,
Post: #18
|
|||
|
|||
RE: BMW F20 EPS no see in esys
|
|||
30-10-2023, 22:43 PM,
Post: #19
|
|||
|
|||
RE: BMW F20 EPS no see in esys
Same problem, Write SVT initialize Flexray fail.
|
|||
30-10-2023, 22:45 PM,
Post: #20
|
|||
|
|||
RE: BMW F20 EPS no see in esys
Are you in car right now?
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
Reputation: +1 - Pedrom92 [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content